Advertisement
ENG – To control the heater there is a rotary control element ( 3 ) in the
bottom of the right pipe ( 1 ). When you turn on the power ( 4 ) the
bottom LED diode ( 2 ) will turn blue.
After this you can control the heater by turning the rotary control
element right. The first LED will turn red and the heater will heat up to 40
degrees. If you continue to turn the control the next LED will turn red and
the temperature will increase with 5 degrees etc.
The heater also has a timer function* that can turn off power after 1-5
hours. To activate the timer, you need to do:
1.
Turn on the heater at level 5 ( all 5 LED is turned on ).
2.
Continue to turn the rotary control element right and the status of
the LED will change. The first LED will flash red. The heater will now
turn off after 1 hour.
3.
Continue to turn the control and next LED will flash red and increase
the time with 1 hour etc. ( max. 5 hours ).
4.
While time is running the LED will turn off one by one and after all
the LED is finish flashing red the heater will power off and the first
LED will be blue.
* The timer can only be activated at level 5 ( 60 degrees )
Dok. AS/1/2019
10
Advertisement
