Advertisement
3. Enter the required information
DDNS
DDNS
DDNS
DDNS Active
Active
Active
Active – If you want to use
DDNS, please set this field to
"Enabled" .
DDNS
DDNS
DDNS
DDNS ISP
ISP
ISP Type
ISP
Type – Select your
Type
Type
DDNS ISP Type.
Self-Define DDNS
Self-Define
Self-Define
Self-Define
DDNS Address
DDNS
DDNS
Self-define the DDNS server
instead of using DDNS ISP Type.
Site
Site
Site Name
Site
Name
Name
Name – The DDNS name for
your device.
DDNS
DDNS
DDNS
DDNS Account/
Account/
Account/ DDNS
Account/
Provider.
STUN
STUN Server
STUN
STUN
Server
Server
Server – If the device is behind a router, a STUN server is needed to help
penetrate the NAT.
Save
4. Click Save
Save
Save to save the changes. You might need to reboot the device to apply all the
changes.
GXV3662
GXV3662
GXV3662
GXV3662 Series
Series
Series
Series SIP
SIP
SIP Page
SIP
The GXV3662 has the ability to receive phone calls and make phone calls when an alarm
event is triggered through motion detection or alarm input. Register the GXV3662 to a SIP
server to enable the product to make and receive phone calls. To make outgoing phone
calls out, the user needs to configure the Phone
Register GXV3662 to a SIP Server
1. From the GXV3662 home page, click Basic
SIP
SIP
Settings
Settings
2. Go to SIP
SIP Settings
Settings Tab.
3. General Phone Settings.
Registered
Registered
Registered
Registered – The field shows the registration
status of the account with the SIP server.
Unregister
Unregister
Unregister
Unregister On
On Reboot
On
On
Reboot
Reboot
Reboot – If it's checked, the SIP user's registration information will be
cleared from the server when the phone reboots.
4. Enter the required information.
Account
Account
Name
Name
Account
Account Name
Name – The field configures the SIP account name.
SIP
Server
SIP
SIP
SIP Server
Server
Server – The SIP Server's IP address or Domain name provided by your service
provider.
Outbound
Outbound
Proxy
Proxy
Outbound
Outbound Proxy
Proxy – The IP address or Domain name of the Outbound Proxy, Media
Gateway, or Session Border Controller. Used for firewall or NAT penetration in different
network environments. If the system detects a symmetric NAT, STUN will not work.
ONLY outbound proxies can provide a solution for a symmetric NAT.
Firmware 1.0.4.8
Grandstream Networks, Inc. 11/08/10
All manuals and user guides at all-guides.com
Address
Address
Address –
DDNS
DDNS Password
DDNS
Password – The account and password from the DDNS
Password
Password
Page
Page
Page
Phone
Phone List
Phone
List
List properly.
List
Basic
Basic
Basic Settings
Settings
Settings > SIP
Settings
GXV3662 IP dome camera Series
SIP .
SIP
SIP
Page
14
of 22
Advertisement
