Process; (4.1) Changing Gamma Correction On/Off; (4.2) Changing Gamma Correction Level - Toshiba IK-HR2D Instruction Manual

4 PROCESS

Move up and down
by pressing
MENU UP,DOWN
-- 4 PROCESS --
GAMMA ON/OFF
GAMMA
DTL GAIN
DTL B.FREQ
M PED
4 1 Changing gamma correction ON/OFF
Move the " " to GAMMA ON/OFF by pressing [MENU UP], [MENU DOWN] buttons.
Select either ON or OFF by pressing [DATA UP], [DATA DOWN] buttons.
Move up and down
by pressing
MENU UP,DOWN
-- 4 PROCESS --
GAMMA ON/OFF
DTL GAIN
DTL B.FREQ
M PED
Menu when GAMMA OFF is selected.
4 2 Changing gamma correction level
Move the " " to GAMMA by pressing [MENU UP], [MENU DOWN] buttons.
Select the desired value of gamma correction level by pressing [DATA UP], [DATA DOWN] buttons.
Correction amount
becomes smaller.
* When OFF is selected in GAMMA ON/OFF selection line, the gamma correction level cannot
be changed.
Select the desired
value by pressing
DATA UP,DOWN
<FILE A>
ON
0
0
HIGH
0
Select the desired
value by pressing
DATA UP,DOWN
<FILE A>
OFF
0
HIGH
0
[ DATA UP ]
- 10 0
[ DATA DOWN ]
Gamma correction ON, OFF
Gamma correction level setting -10 to 10
Detail gain setting -7 to 7
Detail boost frequency
Master pedestal setting -128 to 127
Gamma correction ON, OFF
Detail gain setting -7 to 7
Detail boost frequency
Master pedestal setting -128 to 127
Correction amount
becomes larger.
1 0
24
HIGH, NORMAL, LOW
HIGH, NORMAL, LOW