Acer GD711 User Manual page 30

3D 3D
Choose "On" to enable DLP 3D function.
•
•
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of left/
right image sequence to get the correct image (for DLP 3D).
3D format
•
•
•
•
•
Note 1: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note 2: Functions vary depending on model definition.
Note 3: It needs correct settings on graphic card 3D application program for
correct 3D display.
Note 4: The SW players, such as Stereoscopic Player and DDD TriDef Media
Player can support 3D format files. You can download these three players
on web page below,
- Stereoscopic Player (Trial):
http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial):
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note 5: "3D L/R Invert" is only available when 3D is enabled.
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards with corresponding SW player.
Off: Turn off 3D mode.
Auto: Based on HDMI information to auto setting 3D format.
Frame Packing: Frame packing is one of the HDMI 3D video
format structures and is composed of two stereoscopic pictures:
Left and Right.
Side by Side Half: Side by Side Half is one of the HDMI 3D video
format structures and is composed of two stereoscopic pictures:
Left and Rig which are sub-sampled to half resolution on the
horizontal axis.
Top and Bottom: Top and Bottom is one of the HDMI 3D video
format structures and is composed of two stereoscopic pictures:
Left and Rig which are sub-sampled to half resolution on the
vertical axis.
Frame Sequential: A stereoscopic 3D format that places each, full
left and right frame in sequence (left, right, left, right, etc.).
19