Kia niro 2023 Owner's Manual page 266

Driving your vehicle
Smart Cruise Control operation
switches
Driving Assist button: Turns Smart
Cruise Control on or off.
RES+: Resumes or increases Smart
Cruise Control speed.
SET-: Sets or decreases Smart Cruise
Control speed.
( ): Sets vehicle distance.
CANCEL (O): Cancels Smart Cruise Con-
trol operation.
To set Smart Cruise Control
Speed:
1. Press the Driving Assist button to turn
the function on. CRUISE indicator in
the instrument cluster will appear.
ODEPV052048
2. Accelerate to the desired speed.
Smart Cruise Control speed can be set
as follows:
僅 10~160 km/h (5~100 mph): when
there is no vehicle in front
僅 0~160 km/h (0~100 mph): when
there is a vehicle in front
3. Push the switch down (to SET-), and
release it at the desired speed. The set
speed and vehicle to vehicle distance
on the LCD screen will appear.
ODEPV052050
6 68
4. Release the accelerator pedal. The
desired speed will automatically be
maintained.
If there is a vehicle in front of you, the
speed may decrease to maintain the dis-
tance to the vehicle ahead.
On a steep grade, the vehicle may slow
down or speed up slightly while going
uphill or downhill.
Vehicle speed may decrease on an
downward slope and increase on a
onward slope.
The speed will be set to 30 km/h (20
mph) when there is a vehicle ahead and
your vehicle speed is 0~30 km/h (20
mph).
Also, the speed will be set to 30 km/h
(20 mph) when there is no vehicles
ahead and your vehicle speed is 10~30
km/h (5~20 mph).
Smart Cruise Control not operat-
ing conditions
ODEPV052106L
A: SCC (Smart Cruise Ctrl.) conditions
not met
僅 The driver's door is opened.
僅 The vehicle is shifted to N (Neutral)/R
(Reverse)/P (Park).
僅 The parking brake is applied.
僅 The vehicle speed is not within the
specified SCC range.
僅 The ESC (Electronic Stability Control),
TCS (Traction Control System) or ABS
is operating.
Smart Cruise Control (SCC)