Simultaneous ring
PowerNap
Base name
Reset configuration
Softphone settings
Start setup
Desk phone settings
Start setup
Select which incoming call is
displayed, if several connected
phones ring simultaneously
Select to enable sleep mode if the
base has been idle for 10 hours
View the base name. The base
name and/or headset name can be
changed using Jabra Direct
Select to reset the headset and
base to their default configuration
Select Yes to open the Advanced
softphone settings menu
Tap
to navigate down through
the available softphone settings
Press
to accept any changes
made to the settings. The base will
reboot
Select Yes to open the Advanced
desk phone settings menu
Tap
to navigate down through
the available desk phone settings
Press
to accept any changes
made to the settings. The base will
reboot
47