Page 1
These tutorials originally appeared on a now-defunct Japanese website. A German website dedicated to the Minolta manual focus system had copied the pages and kept them online after the original Japanese site closed up, but the tutorials were written in Japanese.
Page 2
Using the name-ring removal tool, loosen the ring by turning counter- clockwise. Remove the three screws to remove the filter frame cover. Remove the three screws to remove the filter frame cover.
Page 3
Turn the lens over and remove the rear lens cap. If you remove the four screws on the lens mount, the lens mount will come off as a unit. The red arrow mark shows that plastic parts have been incorporated with the diaphragm cam.