Cds; Normal Play - Technics SC-HD310 Operating Instructions Manual

1
OPEN/CLOSE
Label must
face upward.
2
3
VOLUME
DOWN UP
A
CD TEXT SCROLL
B
a
b
c
16
RQT5296
/I
3 1
■ 2
Total playing
Total number
time
of tracks
Elapsed play
Track number time

CDs

Normal play

Preparation: Turn the unit on.
1
Press [ OPEN/CLOSE] to open the
tray.
Set a CD label up on the tray.
Press [ OPEN/CLOSE] to close the tray.
The number of tracks and playing time is displayed if "CD" is
selected as the source.
2
Press [u u ] to start play.
3
Adjust the volume.
To stop the disc
Press [■].
To pause play
Press [ ] during play. Press [
Skipping tracks
Press [ / ] (backward), or [
Searching through tracks
During play
Press and hold [ / ] (backward), or [
"NO DISC" is displayed
When the unit is in CD mode but a disc isn't in the player.
Note
You cannot skip to tracks already played in random play.
●
( a page 17).
Skipping is done in the selected order in program play.
●
( a page 18).
You can search only within tracks in random and program play.
●
A CD text discs
This unit reads and displays the information on these discs.
To switch between the text display and the normal display:
Press [CD TEXT].
Scrolling the text
Press [SCROLL].
"SCROLL ON" is shown and the information scrolls across the
display.
Press [SCROLL] again to cancel.
Scroll does not work if the text is less than 12 letters.
B CD selection and care
Choose discs with these marks: (a)
Do not;
use irregularly shaped CDs (b).
●
attach extra labels and stickers.
●
use CDs with labels and stickers that are coming off or with
●
adhesive exuding from under labels and stickers (c).
attach scratch-proof covers or any other kind of accessory.
●
write anything on the CD.
●
clean CDs with liquids (Wipe with a soft, dry cloth.).
●
] or [u] to resume play.
/ ] (forward).
/ ] (forward).