Technics SC-HD310 Operating Instructions Manual page 15

A
[TPS]
B
MD
CD
TAPE
MUTING
C
1
1
TPS SKIP
2
[ TPS ]
AUTO/
MONO
TAPE EXT/MD TUNER
TUNE
TUNE
VOLUME
2
Cassette tapes
A Fast-forwarding and rewinding
Press [ TPS] or [TPS
is stopped.
Tape direction rewind
u
v
High-speed fast-forward/rewind
This cassette deck is designed to roughly double fast-
forward/rewind speed automatically.
When you fast-forward from the beginning of the tape or rewind
from the end of it, the tape runs at high speed.
When approaching the end of the tape, the deck automatically
drops to normal speed.
B One touch play
Remote control only
When a cassette is loaded and the unit is off, press [TAPE].
The unit comes on and starts play in the direction last selected with
the volume fade in.
C Tape program sensor (TPS)
TPS finds the beginning of a track and starts play from there. You
can skip up to nine tracks.
1
Press [TPS SKIP] to select the
number of tracks you want to skip.
2
Press [ TPS] or [TPS
the direction.
backward
Tape direction
u
v
Pressing [ TPS] or [TPS
the beginning of the current track or the next track,
depending on tape direction.
To cancel
Press [■].
Note
Stop the tape before changing the TPS direction.
●
TPS may not operate correctly in the following situations:
●
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
] while the tape
fast-forward
] to select
forward
] during play takes you to
15
RQT5296