Table of Contents
Advertisement
Settings, con't
Metronome Volume
This setting ranges from 1 (lowest) to 9 (loudest). The default setting is 9. In Settings Mode, press the Prev- or
Next+
Local Control
When you play the CUP2A
On. When using your CUP2A with an external sequencer or computer, turn this setting to Off to avoid creating a
loop which may result in stuck notes or "echoes". Press either the Prev- or Next+
Auto Power Off
This energy-saving feature will automatically shut off power to the unit after a period of inactivity. Simply turning the
power switch off and on will power up the unit once again. This allows you to reduce overall power consumption, and
also extends the lifetime of the instrument. Press the Settings
are Disabled, 15 min, 30 min, 1 hour, 2 hours or 4 hours. The default value is 30 min. Pressing the Prev- /Next+
Input to Disabled will overcome this. The default setting is Enabled
power cycles.
This function resets the Andante CUP2A to the original factory default settings. All user changes, saved Favor-
ites, and user recorded songs are erased. This action cannot be undone.
1. Press the Settings
2. To perform the Hard Reset function press the Next+
3. The display now reads CONFIRM?
4. Press the Next+
memory,
If you want to cancel the Hard Reset and remain in Settings Mode, press the Prev-
There is an alternate method for a Hard Reset on your Andante CUP2A:
1.
2.
Version
displayed.
that your CUP2A
page 12
Settings Mode.
updates to your operating system in Settings Mode press the Settings
HARD RESET?.
2A. The unit will then erase its user
power.
AutoPowerOff
OS" is
www.kurzweil.com) to verify
2A. Complete instal-
Advertisement
Table of Contents
