CAUTION
•
Connecting a dynamic mic with an
unbalanced connection could damage it
if the PHANTOM switch is ON.
•
Do not connect or disconnect mics when
the PHANTOM switch is ON. Doing so
could cause loud noise or damage the
equipment.
•
Use the PHONES/LINE OUT knob to
minimize the volume before turning the
phantom switch ON or OFF. Depending
on the mic, loud noises might be
produced and damage could be caused
to equipment or to people's hearing.
NOTE
•
When the PHANTOM switch is ON the
PHANTOM indicator lights on the top
panel.
•
The pin configuration of the unit's XLR
connector is:
Pin 1 = Ground
Pin 2 = Hot
Pin 3 = Cold
Guitar
Connect your guitar to the
GUITAR IN
jack (1/4" phone jack) on the
front panel and set the
MIC/LINE-GUITAR
switch on the top pannel to
R
-channel
LINE/
.
GUITAR
Guitar
5 – Connections
Keyboard/drum machine/sound
module/cassette deck/MD/CD etc.
(analog connection)
Connect the analog audio output of these
devices to the
LINE IN L
R
jacks (1/4" phone jack) on the front panel.
If you use the
R
-channel, set the
GUITAR
switch on the top panel to
LINE
.
OUT
TASCAM US-122MKII
or
LINE/GUITAR IN
MIC/LINE-
MIC/
Keyboard/
drum machine/
sound module/
cassette deck/
MD/CD or similar
device
19