Download Print this page
AEG HE634070XB User Manual

AEG HE634070XB User Manual

Hide thumbs Also See for HE634070XB:

Advertisement

Quick Links

EN HOB
HE634070XB
USER MANUAL

Advertisement

loading

Summary of Contents for AEG HE634070XB

  • Page 1 EN HOB HE634070XB USER MANUAL...
  • Page 2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Table Of Contents

    Contents CONTENTS 4 Safety instructions 5 Installation instructions 7 Product description 8 Operating instructions 11 Helpful hints and tips 12 Care and cleaning 12 What to do if… 13 Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
  • Page 4: Safety Instructions

    Safety instructions SAFETY INSTRUCTIONS For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Correct operation •...
  • Page 5: Installation Instructions

    INSTALLATION INSTRUCTIONS Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing. HE634070XB 949 595 055 00 58 HAD C6 AO 220-240 V 50-60-Hz 7,1 kW...
  • Page 6 Installation instructions WARNING! Risk of injury from electrical current. The combination appliance is live. • Observe electrical safety rules. • Rated voltage of the combined appliances must match. • Fit plug and socket connections together properly. • Install correctly to give anti-shock protection. •...
  • Page 7: Product Description

    Product description PRODUCT DESCRIPTION Cooking surface layout Single cooking zone 1200 W 170 mm 265 mm Multi-purpose zone 1500/2400 W Single cooking zone 1200 W Control panel Triple cooking zone 800/1600/2300 W Control panel layout Use the sensor fields to operate the appliance. sensor field function the timer display...
  • Page 8: Operating Instructions

    Operating instructions Heat setting displays Display Description The cooking zone is off The cooking zone operates Keep Warm The automatic heat-up function is on There is a malfunction + digit OptiHeat Control (3 step Residual heat indicator): still cooking / keep warm / residual heat Lock/Child safety function is on The automatic switch off is on...
  • Page 9 Operating instructions To switch on the outer ring touch the sensor field . The indicator comes on. For more outer rings touch the same sensor field again. The next indicator comes on. Do the procedure again to switch off the outer ring. The indicator goes out. The automatic heat up Automatic heat up function sets the highest heat setting for some time, and then decreases to the necessary level.
  • Page 10 Operating instructions • To set the cooking zone (if more than 1 cooking zone operate ) : touch again and again until the indicator of a necessary cooking zone comes on. • To activate the CountUp Timer: touch of the timer comes on.
  • Page 11: Helpful Hints And Tips

    Helpful hints and tips To deactivate The Child Safety Device • The appliance is deactivated. • Touch until the symbol flashes. • Touch in the time when symbol flashes, the symbol comes on for 4 seconds. Overriding The Child Safety Device for one cooking session •...
  • Page 12: Care And Cleaning

    Care and cleaning CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom. WARNING! Sharp objects and abrasive cleaning agents will damage the appliance. For your safety, do not clean the appliance with steam blasters or high-pressure cleaners. Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.
  • Page 13: Environment Concerns

    Environment concerns Problem Possible cause and remedy There is no signal when you The signals are deactivated. Activate the signals (see OffSound touch the panel sensor fields. Control). The Automatic Switch Off operates. Deactivate the cooking zone flashes and activate it again after 60 seconds. If after 60 seconds comes on again speak to the service cen- tre.
  • Page 16 892933702-D-322011...