Operation Ranges - Samsung AC BNJDCH Series User Manual

Operation Ranges

Operating temperature and humidity
When using the air conditioner follow the operating temperature and humidity ranges.
Indoor unit / Outdoor unit : AC***BN*DCH / AC***BXADCH
Indoor
Mode
temperature
64°F to 90°F
Cooling
(18°C to 32°C)
64°F to 90°F
Drying
(18°C to 32°C)
86°F or less
Heating
(30°C or less)
Indoor unit / Outdoor unit : AC***BN*DCH / AJ***BX**CH
Indoor
Mode
temperature
64°F to 90°F
Cooling
(18°C to 32°C)
64°F to 90°F
Drying
(18°C to 32°C)
86°F or less
Heating
(30°C or less)
CAUTION
• If you use the air conditioner at a relative humidity above 80%, it may cause a formation of condensation
and a leakage of water on the floor.
• The standardized temperature for heating is 45˚F (7˚C). If the outdoor temperature drops to 32˚F (0˚C)
or below, the heating capacity can be reduced depending on the temperature condition. If the cooling
operation is used at over 90˚F (32˚C) (indoor temperature), it does not cool at its full capacity.
• If the indoor unit is out of the operating temperature and humidity range, the safery device may operate
and the air conditioner may stops.
Outdoor
temperature humidity
0 °F to 122°F
80% or less
(-18 °C to 50 °C)
0 °F to 122°F
80% or less
(-18 °C to 50 °C)
-13 °F to 75 °F
(-25 °C to 24 °C )
Outdoor
temperature humidity
80% or less
Depending on
80% or less
the outdoor unit
specifications
Indoor
If out of conditions
Condensation may occur on the
indoor unit with risk to have
either water blow off or drops
on the floor.
Internal protection triggers and
the air conditioner will stop.
Internal protection triggers and
-
the air conditioner will stop.
Indoor
If out of conditions
Condensation may occur on the
indoor unit with risk to have
either water blow off or drops
on the floor.
Internal protection triggers and
the air conditioner will stop.
Internal protection triggers and
-
the air conditioner will stop.
English 29