Care And Cleaning - Personal Chiller K4024SS User Manual

CARE & CLEANING
For initial use and to keep ice tasting fresh, unplug this unit and
follow these cleaning instructions at least once per week.
Wipe exterior of the ice maker and the interior of the ice bin and
drip tray with a soft damp cloth and wipe dry to avoid any deposits.
Do not use cleaning solvents or abrasive cleansers.
DO NOT USE SOAP IN THE WATER RESERVOIR.
Create a sanitizing solution of (5) cups of water with
(1) teaspoon of household bleach Sodium Hypochlorite (NaCIO).
Carefully pour the solution into the water reservoir using the
supplied funnel.
Plug the unit back in and Press & Hold the Clean Cycle button
for 3 seconds
After the display ring lights yellow, the interior UV light will be
activated with the motor circulating for approximately 3 minutes.
When nished, the Clean Cycle will automatically stop and the display
button will no longer be illuminated.
Unplug the unit and remove the drain hose from magnetic holder to
empty into a sink, or bucket, placed below the level of the ice maker.
Allow the water to completely drain before re-inserting the drain hose
to the magnetized holder and positioning on the side of the unit.
Flush the unit with (5) cups of fresh water 3-4 times, unplugging
and draining the unit for each rinse.
When complete, plug unit back in and add fresh water for ice-making.
TIP:
8