Operating Instructions - commercial cool CCDC02 User Manual

SET UP & USE

OPERATING INSTRUCTIONS

DISPENSING COLD WATER
• Once you have turned the cooling switch into the ON position it will take initially
1 hour for the water to cool. During this time the cold indicator light above the
cold water icon will be steady and the compressor could run continuously. This is
normal. The light will be turned off once the water is cooled.
1. Position a glass or other container under the water spout.
2. Depress the cold water push button downward to begin the flow of water.
3. Release the cold water button to stop the water flow.
Child Safety Lock
DISPENSING HOT WATER
• Once you have turned the heating switch into the ON position it will take initially
15 - 20 minutes for the water to heat up. During this time the hot indicator light
above the hot water icon will be steady. The light will be turned off when the
heating process is complete.
1. Position a glass or other container under the water spout.
2. Slide the red child safety lock forward and depress the hot water button
downward at the same time to begin the flow of water. Continue to hold both
buttons as long as you want the water to flow.
3. Release both the hot water button and the child safety lock to stop the water
flow. The child lock will automatically go back to lock position.
FILTER INDICATOR LIGHT
• This light will indicate when the water cooler is working and filtering the water.
The light will turn off when the filtration process is completed. The filtered water
can still be dispensed from the tank while the filtration is working. The filter
indicator light will turn off once the water tank is full.
Page 14
Hot
Cold