Advertisement
CONNECTION INSTRUCTIONS
W ARNING
W
ARNING
IT IS IMPOR
IT IS IMPORT T ANT THA
ANT THAT Y
CARE AND CL
CARE AND CLOSEL
OSELY F
• •
MUST BE INST
MUST BE INSTALLED BY A QU
• •
DISCONNECT POWER SOURCE
DISCONNECT POWER SOURCE
• •
CO
COVER OR SHIED ANY ADJA
VER OR SHIED ANY ADJACENT LIVE COMPONENTS
• •
ENSURE DEVICE CANNO
ENSURE DEVICE CANNOT BE SWITCHED ON
• •
CHECK POWER SUPPL
CHECK POWER SUPPLY IS DISCONNECTED
1.
Temporarily remove the transparent vinyl cover which is at the bottom of
the sensor
2.
Loosen the screws in the connection terminal, and then connect the
power to connection terminal of the sensor according to the below
connection-wire diagram.
3.
Place the vinyl cover back onto its original location
4. Fold the metal springs of the sensor upwards, until they are in an "I"
position with the sensor, and then place the sensor into the hole in the
ceiling or installation box. Release the spring so that the sensor is set in
this installation position
5.
Switch on and test
T YOU HANDLE THIS PRODUCT WITH
OU HANDLE THIS PRODUCT WITH
Y FOLL
OLLOW THE BEL
OW THE BELOW INSTRUCTIONS
OW INSTRUCTIONS
ALLED BY A QUALIFIED ELECTRICIAN
ALIFIED ELECTRICIAN
CENT LIVE COMPONENTS
T BE SWITCHED ON
Y IS DISCONNECTED
CONNECTION DIAGRAM
(AS PER STEP 2)
Advertisement
