Safety Features - BOROSIL VOLCANO OFR 09 FIN User Manual

. Insert the power plug into the electric supply socket, with the power switch in the OFF position
and the thermostat control knob at minimum position.
. Switch ON the power switch and select the heat setting. (I, II or III)
. Set the thermostat knob to the MAX" temperature setting.
. Once the room temperature stabilizes with maximum temperature setting, reset the thermostat
to desired level.
. The Power Indicator will glow if the temperature is below the setting value of the thermostat.
. After use turn the power switch to OFF position, the thermostat knob to MIN position and
pull out the power plug.
. There will be a ticking sound during initial heating due to oil expansion. This is normal and not a
manufacturing defect.
NOTE:
• It may take some time to reach desired temperature depending upon room size.
• Parts illustrated in this user manual are indicative only, parts provided with the product may
differ with illustrations.
• Specifications are subject to change without notice.
This product has protection safeguards that shut off the product when parts become excessively
hot or if it tips over. If the product shuts off, immediately turn the Control to the OFF position
and unplug it from the electric outlet.
IF TIPPED OVER:
Place the product on a flat, level, stable surface in order to prevent the product from tipping
over again.
INSTRUCTIONS FOR USE

SAFETY FEATURES

6