Advertisement
Information in this document is subject to change without notice.
© 2021 D-Link Corporation. All rights reserved.
Package Contents
DUB-2332 network adapter
USB-A to USB-C adapter
Quick Installation Guide
Warranty documents
Minimum Requirements
PC or laptop with:
Windows 7/8/8.1/10, macOS (OS X 10.8 and above)
USB Type-C port or USB 3.0 Type-A port*
* Using a USB 1.1 or USB 2.0 port will affect device performance. USB 3.0 port is recommended.
Hardware Overview
Interfaces
Number
Item
1
USB Type-C connector
2
Gigabit Ethernet port
3
USB 3.0 ports
4
Enclosure
Number
Interface
1
USB 3.0 Type-A connector
2
USB Type-C port
LED Indicators
LED
Status
Speed 1
Flashing red
Speed 2
Flashing green
Product Setup
1. Plug the USB Type-C cable of the DUB-2332 into available USB Type-C port on your computer. If your computer does
not have USB Type-C port, plug the additional adapter into available USB 3.0 Type-A port on your computer. Then plug
the USB Type-C cable of the DUB-2332 into the USB Type-C port on the additional adapter.
2. Run the setup file in the opened folder to begin the DUB-2332 driver installation.
Note: if the folder containing the setup file is not opened automatically, please open it through a file manager and run the setup file.
3. Attach an Ethernet cable to the Ethernet port on the DUB-2332 and to your network switch, hub or router. You can also
connect USB devices to the USB 3.0 ports on DUB-2332.
Figure 1
Description
Connect to laptop or desktop computer
Connect to switch/router
Connect to USB devices
Aluminium enclosure
Figure 2
Description
Connect to laptop or desktop computer
Connect to the DUB-2332 network adapter
Description
Data transmission at 10 Mbps or 100 Mbps
Data transmission at 1000 Mbps
2
Advertisement
