Sony KV-14FV1B Service Manual page 7

Overview of Remote Control Buttons
Comprobación de los accsorios suministrados
Muting the Sound
Press to mute TV sound. Press
again to restore the sound.
Ejecting a videotape
Press to eject the videotape
Selecting Teletext
Press to switch on teletext.
Selecting TV mode
Press to switch off teletext or
video input.
VCR Operation buttons
For details refer to "VCR Operation" section
of this instruction manual.
Displaying the menu system
Press to display the menu on the TV screen.
Press again to remove the menu display from
the TV screen.
Selecting Picture mode
Press repeatedly to change the picture mode.
Fastext buttons
Descripción general de los botones del Retroproyector Descripción general de los botones del Retroproyector Descripción general de los botones del Retroproyector
For details refer to "Teletext" section of this
instruction manual.
Selecting channels
Press to select channels.
For double-digit programme numbers, e.g.
23, press -/-- first, then the buttons 2 and 3.
If you enter an incorrect first digit, this
should be corrected by entering another digit
(0-9) and then selecting -/-- button again to
enter the programme number of your choice.
Adjusting TV volume
Press to adjust the volume of the TV.
Besides TV functions, all buttons with green symbols are also used for Teletext operation. For more details, please refer to
""Teletext" section of this instruction manual (see page 18).
4
Overview
Displaying on Screen information
Press once to display On-Screen indications (first level).
Press twice to display On-Screen indications (second
level)
Press a third time to cancel.
Temporally Switch Off the Video TV
Press to temporarily switch off the Video TV (the
standby indicator on TV lights up). Press again
to switch on the Video TV from standby mode.
By using this button to turn off the Video TV
instead of the Main Power on/off button,
settings will not be cleared unless that the
power is interrupted or you disconnect the
AC power cord. In that case settings will be
cleared after 7 days.
Selecting input source
Press repeatedly until the desired input symbol of
the source appears on the TV screen.
• When MENU is switched on:
Use these buttons to operate the menu system. For
details refer to "Introducing and Using the Menu
System" of this instruction manual (see page 7).
• When MENU is switched off and a tape is inserted:
Use these buttons to operate VCR. For details refer
to "Playing a Tape and Additional Tasks" section
of this instruction manual (see page 10).
Sleep Timer
For details refer to "Switching Off the Video TV
Automatically (Sleep Timer)" section of this
instruction manual (see page 9).
On Timer
For details refer to "Switching On the Video TV
Automatically (On Timer)" section of this instruction
manual (see page 9).
Selecting the TV Screen format
Press to view programmes in 16:9 mode. Press again
to return to Normal (4:3) mode.
Back to the channel last watched
Press to watch the last channel selected (watched for
at least 5 seconds).
Selecting channels
Press to select the next or previous channel.
The operating instructions mentioned here are partial abstracts from the
SECTION 1
Operating Instruction Manual. The page numbers of the Operating In-
struction Manual remein as in the manual.
GENERAL
Overview of Video TV Buttons
Tape transport buttons
(see page 10).
Main Power On/Off
switch
If you turn off the
Video TV by
using this button
and you do not
turn on it again
during 7 days, all
Headphone Video
the settings will
jack Input
be cleared.
jack
Inserting Batteries into the Remote Control
Make sure to insert the supplied batteries using the correct polarities.
Always remember you dispose of used batteries in an environmental friendly way.
Connecting the Aerial
Connecting cables are not supplied.
TIMER REC
(recording)
REC (Recording)
DIAL TIMER
indicator (see
button (see page11)
(see page 12) page 13)
Press on the mark on the
Standby Standby on/off
front of the Video TV to reveal
indicator button
the front control panel.
Volume control buttons
Programme Up or Down
Buttons (Selects TV channels)
Audio
Selecting Input source
TIMER
Input
jack REC
REC
(recording)
(recording)
on/off
button (see
button (see
page 11)
page 13)
Overview-Installation
By using this
button to turn off
the Video TV
instead of the Main
Power on/off
button, settings
will not be cleared
unless that the
power is
interrupted or you
disconnect the AC
power cord. In that
case settings will
be cleared after 7
days.
GB
5