Advertisement
step 4: Detail 1
PART C:
ASSEMBLY & WALL INSTALLATION
4
Secure
corners of
Vertical Bars
step 5: Detail 1
step 5: Detail 1
step 5: Detail 1
Top view
Top view
Top view
5
STEP 11: Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
D
D
D
Tighten
Horizontal
Bars
STEP 11: Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
STEP 14: Drill holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
6
Mark ONLY
top right
corner
step 4: Detail 1
STEP 8: Use Jig 2 (J2) to align End caps (E) with each other. Tighten all remaining screws on Vertical bar (V2) while pushing horizontal bars (H) down.
D
D
D
Top view
L
STEP 8: Use Jig 2 (J2) to align End caps (E) with each other. Tighten all remaining screws on Vertical bar (V2) while pushing horizontal bars (H) down.
Top view
STEP 11: Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
L
B
STEP 14: Drill holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24
x1
WALL (
WALL
step 4: Detail 1
H
L
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
L
V2
V2
B
V2
I
)
step 4: Detail 1
L
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
L
D
If installing on partition replace
F with #8 wood screw
L
H
Add arro
Paint Ve
Add rota
H
A
B
D
E
F
Page 3
Advertisement
