Aqualuma Pathway Light Fitting Instructions

Advertisement

Unit 4, 54 Siganto Drive
Helensvale
4212 Qld Australia
Email : info@aqualuma.com
Web: www.aqualuma.com

Limited Warranty

(Please pass on to the vessel owner)
Aqualuma warrants all of its product range with a Two (2) year
warranty to be free of defects in workmanship and materials.
Aqualuma warranty will be deemed void if the product is
improperly maintained or as a result of misuse, neglect,
improper installation or natural disasters such as flood, fire,
lightning or unauthorized repairs or modifications.
Aqualuma will replace at it's option any product or part free of
charge upon return of the defective item and will pay for return
freight within warranty period.
Fitting Instructions for
Aqualuma's liability in all claims and events is limited to and shall
not exceed the purchase price of the Aqualuma product. No
affirmation of fact or warranty expressed or implied other
Pathway Light
than that set out in the warranty statement above is made or
authorized by Aqualuma.
Aqualuma disclaims any liability claims that are due to
misapplication, improper selection or misuse. Any
liability for consequential or accidental damages is expressly
disclaimed.
AMG ( QLD) PTY. LTD. Trading as Aqualuma
Unit 4, 54 Siganto Drive
Helensvale
4212 Qld Australia
Email : info@aqualuma.com
Web: www.aqualuma.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pathway Light and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqualuma Pathway Light

  • Page 1 Limited Warranty (Please pass on to the vessel owner) Aqualuma warrants all of its product range with a Two (2) year warranty to be free of defects in workmanship and materials. Aqualuma warranty will be deemed void if the product is...
  • Page 2 Pathway Light Fitting Instructions 12/24 Volt AC/DC only This light will operate on 12 or 24 volts ac or dc Current draw is .2 of an amp @12 volts When connecting to a 12 or 24 volt DC transformer connect the red wire to positive and black to negative, connecting these wires incorrectly for a short time will not damage the light but it will not illuminate.

Table of Contents