Advertisement
Available languages
Available languages
EN
12
Step 4: Couple to the bike
•
The drawbar can be connected to the bicycle in a simple and quick way:
Unscrew the nut of the rear wheel hub and insert the hook between the
bicycle frame and the rear wheel hub (like an additional washer).
•
Screw the rear wheel of your bicycle back on.
•
The hook should be attached with the 'male' part pointing backwards and
away from the bicycle, as shown in the illustration.
•
Place the hanger behind the bicycle and integrate the 'male' piece into the
eyelet provided ('female piece', see illustration).
•
Secure the connection with the safety belt by wrapping it once around
the bicycle frame (make sure it does not get caught in the spokes) and
attaching it to the hanger part of the drawbar.
Step 5: Secure your pet in the hanger
•
Always load your pet into the trailer through the rear door while keeping
the front door closed.
•
Ask a second person to hold the bicycle in the meantime.
•
The safety leash provided should be connected to a dog harness and not
to a collar.
•
Close the rear door before driving off.
Advertisement
