Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SmartDHOME WBSH2-7
Summary of Contents for SmartDHOME WBSH2-7
- Page 1 Electric charging station WBSH2-7 User Manual and data sheet Thank you for choosing the SmartDHOME electric vehicle charging station. Below are all the technical specifications and procedures for correct installation. www.myvirtuosohome.com www.smartdhome.com...
-
Page 2: Warning Signs
Restriction of hazardous substances REACH Registration, evaluation and authorization of chemicals The following warning signs, mandatory signs and information signs are used in the WBSH2-7 charging station. Warning signs CAUTION: Warning of electrical hazards. This sign is intended to alert the user that severe personal injury or substantial property damage can result if the device is not operated as requested. - Page 3 Do not leave flammable or explosive substances near the charging station, in order to avoid serious damage to things and/or people. • The WBSH2-7 charging station must be installed in a place free of dust, gases or vapors harmful to insulation. •...
-
Page 4: Operation
Electric charging station WBSH2-7 User Manual and data sheet shocks. For good ventilation, mount the charging station vertically. • The station must not be installed at ground level. In addition, a drainage channel must be positioned around the charging station because, otherwise, the equipment could be damaged. -
Page 5: Maintenance
Electric charging station WBSH2-7 User Manual and data sheet Maintenance During maintenance operations, all protective devices must be used. The replacement of accessories must be carried out by qualified personnel; otherwise, explosions and dangerous fires could occur. NOTE: For more information on this, we recommend that you contact our customer support immediately by visiting the website: http://helpdesk.smartdhome.com/VDSmartdhome/users/Login.aspx... - Page 6 Electric charging station WBSH2-7 User Manual and data sheet Charging interface • IEC 62196-2 Single-phase socket Three-phase socket...
-
Page 7: Technical Notes
Description & Technical Notes The WBSH2-7 charging station is ideal for charging electric vehicles and can be installed in residential environments, hotel parking, garages, and car parks. It has a 4.3 '' display that allows you to view the charging status and interface with all the functions of the device. -
Page 8: Environmental Conditions
Electric charging station WBSH2-7 User Manual and data sheet Functions Charging way Mode 3 Local: “Plug and Play” or smart card Charging method Remote: Control from app 4.3’’ LCD Display (Allows you to view: charging current, voltage, power, charging time, status and error information, etc.) -
Page 9: Package Contents
Electric charging station WBSH2-7 User Manual and data sheet Package Contents • WBSH2-7 charging station • 2 cards RFID • Wall mounting accessories • Quality certificate • User Manual Pre-Installation Note: Before continuing with the installation phase, it is necessary to read all the points listed below. -
Page 10: Installation
If you want to install the charging station on the wall, the following spaces must be respected. Note: It is recommended to install the WBSH2-7 charging station in a well-ventilated area, not exposed to sunlight and protected from wind and rain. In order to ensure good ventilation, it is recommended to mount the charging station in an upright position. - Page 11 Insert the three cable terminals on the wires of the power cable, crimping them using suitable pliers. NOTE: Here are some suggestions for selecting the size of the cables to be installed. The table below shows all the types of recharging station provided by SMARTDHOME therefore it is recommended to use: Product...
-
Page 12: Rs-485 (Modbus)
Finish installing the charging station on the wall bracket. Then fasten the 2 side screws to lock the charging station. RS-485 (ModBus) The WBSH2-7 recharging station has the ModBus communication protocol, of the RS-485 type; all the steps for a correct configuration are shown below. - Page 13 After completing the connection and installation of the WBSH2-7 charging station, it can be started. The “POWER” LED will turn on and it will mean that the station has gone into Stand-by status. As shown in the figure, the WBSH2-7 charging station has a panel with which it is possible to interact.
-
Page 14: Status Led
Note: In all cases, when the “Power” LED flashes, it indicates the correct exchange of information between the charging station and the system. Display LCD The WBSH2-7 charging station is equipped with a large LCD display that allows the user to have a graphic feedback from the charging station. The images below indicate all the features provided. Icon... - Page 15 Electric charging station WBSH2-7 User Manual and data sheet Ricarica... Charging status Ricarica terminata Charging finished, follow the instructions on the display Stato di arresto di emergenza The emergency stop button is pressed Mancato avvio Does not start, follow the instructions on the display...
-
Page 16: Emergency Button
Configuration Note: The WBSH2-7 charging station can be configured using a laptop or smartphone connected to the Internet. For a correct configuration follow all the steps below. - Page 17 Electric charging station WBSH2-7 User Manual and data sheet • Enter the password 12345678 to access the configuration menu. It is advisable to change the password once logged in. • After changing the parameters, click “SAVE” to save all the data correctly. Then click "RESTART" to restart the charging station and make all the changes made active.
-
Page 18: Start Charging
Electric charging station WBSH2-7 User Manual and data sheet Start charging To correctly start charging your vehicle, it is advisable to follow all the steps indicated below: • Park your electric car, switch it off and put it in parking mode. -
Page 19: Stop Charging
Once you have finished charging your electric vehicle, please manually remove the station socket from the electric car and place it in the side socket of the charging station. Breakdown management and support The WBSH2-7 charging station is equipped with automatic fault protection. The error handling table is shown below. Information on the Category... - Page 20 Electric charging station WBSH2-7 User Manual and data sheet • quickly. Check the input voltage. • Flashes once slowly Overvoltage Check that the incoming cables are connected and then four times correctly. • quickly. Check the input voltage. Flashes once slowly...
-
Page 21: Warranty And Customer Support
Electric charging station WBSH2-7 User Manual and data sheet quickly. recommend that you contact our customer support through the following link: http://helpdesk.smartdhome.com/users/register.aspx Flashes twice slowly Failed RCD The RCD protection is damaged and requires the assistance and then four times of one of our specialized technicians, therefore we quickly. - Page 22 Electric charging station WBSH2-7 User Manual and data sheet SmartDHOME Srl V.le Longarone 35, 20058 Zibido San Giacomo (MI) info@smartdhome.com Product Number: 01040-1500-00 Rev. 04/2022...
Need help?
Do you have a question about the WBSH2-7 and is the answer not in the manual?
Questions and answers