Inserting The Card; Connection Examples; Connection Of Channels I And Ii; Installation Without Speaker Line Monitoring - Optimus UMX-MC6 Operating Instructions Manual

3. INSERTING THE CARD

Card UMX-MC6 may be inserted in slots 3 to 10 of the COMPACT audio matrix or in any of the COMPACT-E slave matrix slots.
To insert the card proceed as follows:
1) Disconnect the power supply to the unit (POWER SUPPLY 1 and POWER SUPPLY 2 strips).
2) Remove the rear blank plate for the slot where the card is to be inserted. The cards occupy a slot.
3) Insert the card by fitting it into the slot guides and fasten it by means of the fastening screws.
4) Reconnect the power.

4. CONNECTION EXAMPLES

4.1. Connection of channels I and II;
installation without speaker line
monitoring
AMPLIFIER A
AMPLIFIER B
UMX-MC6 version 3.2.000
UMX-MC6
MUSIC
PAGING
Figure 3
AMPLIFIER
A
AMPLIFIER
B
Switching card with 2 input channels
and 6 output zones
UMX-2SA UMX-MC6
7