Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DURHAND 845-218
Summary of Contents for DURHAND 845-218
- Page 1 Electric Chain Saw Instruction Manual 845-218 845-219...
-
Page 6: How To Use These Instructions
Dear customer, Thank you for placing your trust in our prod- uct! Before using the product for the first time, please make sure you read these operating instructions! Here you will find information about how to use the product safely and ensure its long service life. You should pay attention to all of the safety instructions in this document! How to use these instructions All of the necessary diagrams can be found on the first pages of this set of instructions. - Page 7 • Always ensure that a device which has WARNING! been switched off cannot be restarted Probable danger to life and risk of unintentionally. injury! • Do not use devices with an on/off switch Generally dangerous situation that that does not function correctly. may lead to death or severe injuries.
-
Page 8: Electrical Safety
Maintenance • Unsuitable tools inserted; • Before conducting any maintenance on • Unsuitable material; the device, disconnect the mains plug. • Insufficient maintenance. • Only those maintenance and fault elimi- You can reduce the risks considerably by fol- nation tasks described here may be car- lowing the tips below: ried out. -
Page 9: Residual Risks
• Make sure that you can stand firmly and • Symbols appearing on your product may safely in each work position. When work- not be removed or covered. Information ing on a sloping subsurface, be espe- on the product that are no longer legible cially careful! must be replaced immediately. -
Page 10: Your Device At A Glance
• Breathing in of particles from cut items Assembly • Contact with petrol/oil For this reason, it is essential that this chain saw is always used with the additional per- sonal protective equipment as shown on the machine and described in these operating DANGER! instructions. -
Page 11: Operation
If there is sufficient chain greasing, the oil Note: spraying off of the saw chain will form a slight When attaching the chain, heed the trail. correct position of the guide groove (saw rail). Checking the chain brake The chain brake ensures immediate blocking –... -
Page 12: Starting The Device
Chain catcher – Plug the unit plug into the connector of the extension cable. – Feed the extension cable through the strain relief mechanism (13) as shown. Starting the device ► P. 6, item 9 – Hold the device fast with both hands. –... - Page 13 Here’s how to saw correctly! Only a careful and correct working method can reduce the risk of a rebound reliably! DANGER! Risk of injury! Basic work technique Always switch the motor off before DANGER! you put the device down! Risk of injury! •...
- Page 14 • the next workplace is at least two and a half tree lengths away. Before felling, the felling direction of the tree must be checked and it must be ensured that there are no objects, people or animals in a distance of 2 1/2 tree lengths. With this technique, sawing occurs with the upper edge of the saw rail from below upwards.
-
Page 15: Cleaning And Maintenance
DANGER! In the interest of your own safety! Only perform the maintenance work described here yourself. Any other work, especially motor maintenance and repairs must be performed by a trained professional. In area A, first cut through approximately one Improper work can cause damage to third of the trunk diameter from above down- the device and thus also injuries. -
Page 16: Storage And Transport
– Loosen the fastening nut (4) by approxi- • Let the device cool down before you mately one turn. store it. – Lift the tip of the saw rail slightly. • Store the device as horizontally as possi- ble. – Tighten the tensioning screw for chain tension (15) until the chain lies on the Longer downtimes underside of the saw rail. -
Page 17: Technical Data
If you are unable to remedy the fault yourself, *) The specified values are emission values and do not necessarily represent safe workplace please contact your local store. Please note values. Although there is a correlation between that improper performance of repair work emission and immission levels, this cannot be will lead to the loss of any warranty claims used to infer whether additional safety meas-...
Need help?
Do you have a question about the 845-218 and is the answer not in the manual?
Questions and answers
what size chain should i have
The compatible chain size for DURHAND part number 845-218 is 3/8LP 050 56.
This answer is automatically generated
I have assembled the chain saw as instructed but I does not work. I have tried different plug sockets band different extension leads as well