7th Sense Medialon MAS Pro Dante DH Hardware User's Manual

Specification

Environmental Characteristics
Temperature
Humidity (non-condensing)
Altitude
Product Electrical Rating
MAS Pro Dante DH 100-240V, 7-3.5A, 60-50Hz

Regulatory Compliance Statements

FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user guide, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
European Union
This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
7thSense Design Ltd : 2 The Courtyard, Shoreham Road, Upper Beeding, BN44 3TN, UK
www.7thsense.one
Copyright © 7thSense Design Ltd : M732-2
Operating Non-operating
+15 to +30 C -10 to +50 °C
°
10 to 90% 5 to 95%
<2000 m <10000 m
Weight (kg)
Dimensions (H × W × D)
18
2U × 483 mm × 545 mm
June 2022
Medialon MAS Pro Dante DH
Hardware User Guide
Customer Support Portal: https://portal.7thsense.one

Support

If your MAS Pro Dante DH was purchased through one of our regional distributors, please
contact your supplier directly for support.
Visit our customer support portal where you can find a wide range of support documentation
and video tutorials, together with contact information.

Warranty

Standard warranty is 24 months, return-to-supplier. Please contact your supplier if you require
an extended warranty. Please ask for instructions and request authorisation before returning a
server to your supplier.

Operating Instructions

Operating instructions for your server can be found in the Online User Guides section of the
customer support portal.

Handling and Installation

Unpacking

Unpack your MAS Pro Dante DH carefully onto a clean and level surface and examine it for any
signs of transit damage. Contact your supplier immediately if anything appears to be damaged,
or any parts missing. Please retain all packaging in case of future need to return a server.

Lifting

MAS Pro Dante DH weight is stated below and on the server's product label. Especially when
manoeuvring them into a rack or at height, observe your internal manual handling
recommendations to avoid injury.

Rack mounting

The MAS Pro Dante DH is a 2U device, supplied with rack mount slide rails and fixings.
Installation instructions are included with the slide rails. Ensure that rack-mounted servers are
properly secured to the rack cabinet using M6 rack mount bolts.
Rack stability warnings:
• Ensure the rack is stable (e.g. bolted to the floor) before sliding out the server.
• Do not place objects on equipment projecting from a rack (e.g. do not use as a shelf).
• Only slide out one piece of equipment from the rack at a time.