Preface
Warranty
Unpacking
ii
Polystat
Cole-Parmer warrants to the direct purchaser that the Cole-Parmer Polystat
recirculating chillers, distributed by Cole-Parmer, will be free from defects
in material or workmanship for a period of one year from the date of
delivery.
Cole-Parmer will repair or replace the product or provide credit, as its sole
option, upon prompt notification and compliance with its instructions.
The Distributor warrants to Customer that upon prompt notification and
compliance with Distributor's instructions, that the Distributor will repair
or replace, at Distributor's sole option, any Product which is defective in
material or workmanship.
Distributor expressly disclaims all other warranties, whether expressed,
implied or statutory, including the warranties of merchantability, and
fitness for a particular purpose. Distributor's sole responsibility and the
Customer's exclusive remedy for any claim arising out of the purchase
of any Product is repair or replacement, as described above. In no event
shall Distributor's liability exceed the purchase price pain therefor; nor
shall Distributor be liable for any claims, losses or damage of any third
party or for lost profits or any special, indirect, incidental, consequential,
or exemplary damages, howsoever arising, even if Distributor has been
advised of the possibility of such damages.
The line cord it is located under the shipping crate's lid. Do not discard the
lid until the cord is located.
Retain all cartons and packing material until the chiller is operated and
found to be in good condition. If the chiller shows external or internal
damage contact the transportation company and file a damage claim. Under
ICC regulations, this is your responsibility.
Out of Box Failure
An Out of Box Failure is defined as any product that fails to operate in
conformance with sellers published specifications at initial power up. Install
the chiller in accordance with manufacturer's recommended operating
conditions within 30 days of shipment from the seller.
Any Temperature Control product meeting the definition of an Out of
Box Failure must be packed and shipped back in the original packaging
for replacement with a new chiller; seller to pay the cost of shipping.
Customer must receive a Return Material Authorization (RMA) from prior
to shipping.
Cole Parmer
Need help?
Do you have a question about the Polystat I and is the answer not in the manual?