Mitsubishi Electric MAC-100FT-E Operation Instructions And Installation Manual page 4

Contents
About Plasma Quad Connect
en
1. Safety precautions
[Precautions for installation]
End user should not install the Plasma Quad
Connect, it is designed for Professional installation
only.
The Plasma Quad Connect should be securely in-
stalled in accordance with the enclosed Installation
Instructions.
The unit should be mounted in a location that can
support its weight.
Mount so that an external force and stresses are not
transmitted to the terminal connection by the wiring.
Securely attach the cover to the Plasma Quad
Connect unit.
EN-1
Warning
The Plasma Quad Connect unit should be connect-
ed to power supply of the correct rating.
Mitsubishi components or other designated compo-
nents must be used for installation.
electrical engineer and/or authorized personnel ac-
cording to the local regulations and the instructions
detailed in the installation manual.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
- sion or instruction concerning use of the appliance
by a person responsible for their safety.
This appliance shall be installed in accordance with
national wiring regulations.
- If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
1
5
7
8
12