Related Manuals for ESPRIT Esprit ET10
Summary of Contents for ESPRIT Esprit ET10
- Page 1 ET8 / ET6 ET10 OWNER’S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL!
-
Page 2: Table Of Contents
Table of Contents Product Registration Important Safety Instructions Important Electrical Information Important Operation Instructions Assembly instructions Folding & Transport Instructions Operation of Your New Treadmill Programmable Features Target Heart Rate Using a Heart Rate Transmitter Heart Rate Control Operation General Maintenance. Service Checklist - Diagnosis Guide Manufacturer s Limited Warranty ...18... -
Page 3: Product Registration
Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. The local dealership where you purchased this treadmill is your administrator for all Spirit warranty and service needs. -
Page 4: Important Safety Instructions
Important Safety Instructions WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 120-volt, 20-amp grounded outlet. -
Page 5: Important Electrical Information
Important Electrical Information WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large switching currents of the drive motor will trip GFCI type outlets, as will any appliance with a large motor. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels. -
Page 6: Important Operation Instructions
NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start with at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit. - Page 7 Assembly Pack Check List (ET8 / ET6) 5x 16m/m Screw (6 pcs) Safety Key (1pc) Combination M5 Allen Wrench & Phillps Head Screw Driver (1 pc) Speed Nut (6 pcs) M6 Allen Wrench (1pc) 5/16 x1/2 Button Head Socket Bolt (12 pcs) Lubricant (1pc) ET6 / ET8 / ET10...
-
Page 8: Assembly Instructions
Assembly Instructions (ET8 / ET6) ET6 / ET8 / ET10... - Page 9 !!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS. PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!! Serious injury could occur if this folding treadmill is not unpacked properly. There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally during shipping. If this strap is not removed properly the treadmill could spring open unexpectedly and cause injury if someone is standing near the treadmill when the strap is removed.
- Page 10 Assembly Pack Check List (ET10) 5/16 x1/2 Button Head Socket Bolt (10 pcs) 3/8 x 2 Button Head Socket Bolt (2 pcs) Safety Key (1pc) Combination M5 Allen Wrench & Phillips Head Screw Driver (1 pc) Speed Nut (4 pcs) 5 x 16 m/m Screw (2 pcs) 3/8 x 2T...
- Page 11 Assembly Instructions (ET10) ET6 / ET8 / ET10...
- Page 12 Assembly ( ET10 ) STEP 1 Remove all parts from the carton. STEP 2 Connect the lower Computer Cable with the upper Computer Cable. STEP 3 Hand tighten Right and Left Uprights into Main Frame with two 3/8 x 2 Button Head Socket Bolts, two 3/8 x 2T Split Washers and six 5/16 x 1/2 Button Head Socket Bolts by using the Combination M5 Allen Wrench &...
-
Page 13: Folding & Transport Instructions
ET6 / ET8 Folding Instructions Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position. -
Page 14: Operation Of Your New Treadmill
Operation of Your Treadmill Getting familiar with the control panel ET6 Console ET8 / ET10 Console ET6 / ET8 / ET10... -
Page 15: Getting Started
Getting Started: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not power on without it. When the power is turned on, all the lights on the display will light for a short time. - Page 16 Incline Feature: Incline may be adjusted anytime after belt movement. Press and hold the Adjust effort. You may also choose a more rapid increase / decrease by selecting desired key, 2 through 12, on left hand side of console (incline). The display will indicate incline percent as adjustments are made.
-
Page 17: Programmable Features
(3) Turn of the main switch on the front of the treadmill, below the motor cover. Programmable Features The New Spirit treadmills offer 7 factory preset programs, 2 user defined programs and one Manual program. Each preset program has a maximum speed level that is displayed when a desired workout is chosen. -
Page 18: User Programs
STEP 5: The Speed window will now be blinking the preset top speed of the selected program. Use the Up/Down keys to adjust, then press enter. Each program has various speed changes as you progress through the profile; this allows you to limit the highest speed the program can reach. Now press the start button to begin your workout. -
Page 19: Target Heart Rate
With all Spirit Heart Rate Control treadmills, you may use the heart rate monitor feature without using the Heart Rate Control program. This function can be used during manual mode or during any of the nine different programs. -
Page 20: Using A Heart Rate Transmitter
REGISTERING PROPERLY ON THE TREADMILL’S DISPLAY! Special Operations of Heart Rate Functions: All Spirit treadmills that are factory equipped with a Heart Rate Control system have many distinct features both in the Heart Rate Control program and during heart rate monitoring. This section will give you a more detailed background to use your treadmill in the most effective manner. -
Page 21: Heart Rate Control Operation
Heart Rate Control How the Heart Rate Control Program Works: Heart Rate Control (HRC) uses your treadmill's speed and incline systems to adjust your heart rate. Increases and decreases in elevation affect heart rate much more efficiently than changes in speed alone. -
Page 22: General Maintenance
General Maintenance Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the edge of the belt and the area between the belt edge and frame. Also reach as far as practical directly under the belt edge. - Page 23 Proper belt tracking is an owner responsibility common with all treadmills. ATTENTION: DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING / TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY. ET6 / ET8 / ET10...
- Page 24 BELT / DECK LUBRICATION: Do not lubricate with other than Spirit approved lubricant. Your treadmill comes with one tube of lubricant and extra tubes can be ordered directly from Spirit. There are commercially available lube kits, but the only one currently approved by Spirit is Lube-N-Walk. These kits come with an application wand that makes applying the lubrication easier.
-
Page 25: Service Checklist - Diagnosis Guide
If an extension cord is required it should be as short as possible and heavy duty 16 gauge minimum. Low household voltage. Contact an electrician or your Spirit dealer. A minimum of 110 volt AC current is required. High belt/deck friction. See General Maintenance section on lubrication. - Page 26 2) You can now scroll through the menu using the up and down keys. Use the Stop key to return to previous menu selection. The menu selections are: 1) Calibration (used to verify calibration) 2) Factory settings (These should not be changed unless instructed by Spirit service department) 3) Security (This allows you to lock the console keyboard) 4) Functions...
-
Page 27: Manufacturer S Limited Warranty
3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107. 4. If no local service is available, Spirit will repair or replace the parts, at Spirit s option, within the warranty period at no charge for parts.