User Indications; Description Of The Cabinet; Transport And Handling; Receipt And Storage - Bonnet Neve Design Series User Instructions

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
IT
9.1

Description of the cabinet

FR
The cabinet is only suitable for holding the
EN EN
temperature of cooked warm food for short
periods of time and exclusively when the food is
DE
being served.
ES
No other use, like cooking or long-term
temperature holding, is allowed.
PT
The general characteristics and the dimensions
are illustrated in the figures and in the sections
contained in "General description" (from pg. "6"
to pg. "10").
F
it is necessary to highlight that inside
the display case, the top heating panel
especially burt also the outer surfaces
directly affected by the radiation of the
inside heat, may reach a very high
temperature. It is advisable to protect
the upper limbs by the use of devices
that may safeguard from heat and
accidental contact with hot parts. Also
use the
prevent untrained persons from coming
in contact with said surfaces.
9.2

Transport and handling

The cabinet is contained in a specific packaging
equipped with a platform for handling with
forklift trucks.
To transport and handle the cabinet use:
• Exclusively a dedicated or equivalent
platform
• A manual or electric forklift suited to lifting
the cabinet, with characteristics that
comply with current Standards
N°DOC. UM000311 REV. "C" - 18/01/22
9.

USER INDICATIONS

measures appropriate
SHAPE HOT TABLE
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
The weights of the cabinet (empty and with
packaging) and the dimensions of the packaging
are shown in "Transportation of the cabinet"
(chart "Chart I" and figures at pg."11").
The handling operations must be carried out by
qualified staff able to assess weights, lifting
points and most suitable means in terms of
safety and capacity.
9.3

Receipt and storage

Check conditions of the packaging before
accepting the cabinet from the carrier.
If there is obvious damage in the packaging:
• Remove the packaging of the cabinet in
the presence of the carrier.
• Sign the
reservation.
The manufacturer shall not be held responsible
for any damage caused due to transport or
incorrect storage of the cabinet.
The cabinet must be stored in a place sheltered
from sun and weather, with a temperature of
to
between -25°C and +55°Cand a relative
humidity of the air between 30% and 95%.
9.4 Installation and ambient
conditions
The cabinet is not designed to be installed
outdoors.
For a correct operation of the cabinet, ensure
that it is positioned:
• On a levelled floor ("Fig. 24").
• Far from heat sources, from the direct
radiation of the sun, from doors, windows,
fans and air vents ("Fig. 25").
20/26
delivery document with