Sencor SWS TS Manual

SWS TS , SWS THS
REMOTE SENSOR for SWS WEATHER STATION
⚫ When power is on, first signal of temperature and humidity (SWS THS only) will send
out after 15 second. Then automatic send signal of outdoor temperature and humidity
(SWS THS only) every 58 second.
⚫ Use "CH" to switch channel 1/2/3
⚫ Press "TEST" to into test mode, this function for production only.
⚫ Press "C/F" to switch Celsius temperature or Fahrenheit temperature.
Power supply : 2 x AAA alkaline battery (not included)
Radio frequency : 433 Mhz
Desktop or wall mountable
For details refer to main unit instruction manual.
The product has been designed and manufactured in accordance with the governmental regulation
and relating standards EN 55022:1998 + A1:2000 + A2 2003, EN 55024 : 1998 + A1:2001 + A2 2003.
The Conformity Declaration is available at :
EN Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that this
product shall not be treated as household waste. Please, dispose of this equipment at your
applicable collection point for the recycling of electrical & electronic equipments waste. In the
European Union and Other European countries which there are separate collection systems for
used electrical and electronic product. By ensuring the correct disposal of this product, you will
help prevent potentially hazardous to the environment and to human health, which could otherwise
be caused by unsuitable waste handling of this product. The recycling of materials will help
conserve natural resources. Please do not therefore dispose of your old electrical and
electronic equipment with your household waste. For more detailed information about
recycling of this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
Changes in construction, design and specification are subject to change without notice.
www.sencor.eu .