Subscribe to Our Youtube Channel
Related Manuals for Apex Digital APXBASE
Summary of Contents for Apex Digital APXBASE
- Page 1 INSTALLATION GUIDE OPERATING MANUAL Base Station All-in-One Headset APXBASE APXHS Model No. Model No. Before attempting to install this product, please read these instructions carefully and save this guide for future use.
-
Page 2: Overview Of Installation
INSTALLATION GUIDE Warning: Failure to follow all guidelines in this installation manual can result in the damage of components and the system itself which can void the warranty. To ensure the system’s performance and reliability of components read all of the installation manuals before starting the installation process. -
Page 3: Installing The Base Station
INSTALLATION GUIDE Wire Pull New cable must be pulled through the conduit and inside to the location of the base. Must use the provided cable that came with the system. Using any other cable may cause issues with the audio itself and possibly void the system warranty. Installing Loop Detector Follow the instructions provided with the vehicle detector for installation and wiring to the loop. -
Page 4: Mounting The Base Station
INSTALLATION GUIDE Mounting the Base Station Using the supplied wall mount with hardware follow the instructions provided in it to install the mount to the wall and the base. Connecting Outside Post to the Base Using the supplied terminal block, connect wires for the outside speaker, microphone, loop detector, and kitchen speaker (if applicable). - Page 5 INSTALLATION GUIDE Apex Base Wiring Power Terminal Pin 1 DC+ from power supply Pin 2 DC- from power supply Pin 3 Ground (not used) Lane 1 and Lane 2 Terminal Pin 1 Kitchen speaker positive Pin 2 Kitchen speaker negative Pin 3 Outside speaker Pin 4...
-
Page 6: Troubleshooting
INSTALLATION GUIDE Troubleshooting Problem Possible Cause Solution Need help with the system settings. Operations guide has been lost or misplaced Each system comes with a help guide located and adjustments need to be made. on the settings tab of the system. This guide does not require you to be logged into the system but will help with the basic settings and operations of the base. - Page 7 INSTALLATION GUIDE Problem Possible Cause Solution No alert when the vehicle pulls up to the System is in override. If you can constantly hear the outside menu post. microphone, check to make sure the base station is not in override. See operations manual on changing base station out of override.
- Page 8 INSTALLATION GUIDE Specifications Headset Internal communication page Part number: APXHS Battery type: 3.7V Li-Ion Headset volume control Battery life: 8 hrs (typical use) Communicate with Lane 1 when using dual lane RF frequency band: 1920 – 1930 GHz Communicate with Lane 2 Weight w/ battery: 3.4 oz Warranty:...
-
Page 9: Base Station
INSTALLATION GUIDE Base Station Part number: APXBASE Outside speaker output: 4 watts RMS into 8 ohm Voltage input: 24VDC +/- 2.5V - use the Kitchen speaker output: 4 watts RMS into 8 ohm provided power adapter RF frequency band: 1920 – 1930 GHz DC current input: 0.5A... - Page 10 INSTALLATION GUIDE Speaker 5 ⅜ ” Part number: RFWRSPK Operating temperature: -40C to +100C Frequency response: 200 - 12000 Hz Sensitivity: 94 dB Impedance: ” 8-ohm nominal 5 ⅜ ” Dimensions: 5 ⅜’’ L x 5 ⅜’’ H x 4’’ (L x W x H) Warranty: 12-Months...
- Page 11 800.598.2370 rfdrivethru.com OFFICES IN: CHICAGO • DALLAS • LOS ANGELES • NEW ENGLAND • ST. LOUIS rfdrivethru.com I 800-598-2370 I 24-Hour Customer Service © 2022 R.F. Technologies, Inc. All rights reserved. APX_0022...
Need help?
Do you have a question about the APXBASE and is the answer not in the manual?
Questions and answers