Panasonic SA-XR10E Service Manual page 22

Pin Terminal I/O
NO. Name
27 AAC_LED O AAC LED control signal
28 DIGITAL_LED O DIGITAL LED control signal
29 DTS_LED O DTS LED control signal
30 AC3_LED O AC3 LED control signal
31 DPL_LED O DPL LED control signal
32 DBSP O Power amp. Frequency (48/
33 NC -
34 SYNC I
35 RESET I
36 XCIN -
37 XCOUT -
38 XIN I
39 X0UT O Oscillator connected
40 VSS -
41 DCDET I
42 PCNT O Power control signal output
43 SD I
44 DO/ST I
45 NJM_SW1 O Video SW1 ON signal output
46 VR_UP_LED O Volum up LED control
47 NJM_SW2 O Video SW2 ON signal output
48 H.P_MUTE O Headphon muting signal
49 PHONE I
50 ANALOG_ATT O Aalog ATT ON/OFF control
51 MUTE_FRONT O Front speaker(L/R) muting
52 MUTE_SR O Surround speaker(L/R)
53 MUTE_SW O Sub woofer muting signal
Function
output
output
output
output
output
96Hz) setup terminal
Not used, open
Synchronized signal input
for power failure detection
Rest signal input
Not ued, connected to GND
Not used, open
Oscillator connected
terminal (f=8MHz)
terminal (f=8MHz)
GND terminal
DC power detection signal
input
Tune detection signal input
Tuner DO/ST signal input
signal output
control
Headphon detection signal
input
signal output
signal control
muting signal control
control
22