Escooter Hover-1 Axle Quick Start Manual

Always wear a properly
tted helmet that
complies with CPSC or CE
safety standards when you
ride your scooter.
Hover-1 Axle • Wall Charger • Operation Manual/Quick Start Guide
Stay relaxed and step on quickly, con dently and evenly. Imagine climbing
stairs, one foot, then the other. Look up once your feet are even. The Axle
may vibrate or spin in one direction, if weight and pressure are applied to
Turn O Your
Hover-1 Axle
1. Place the Axle on a at surface.
2. Press and hold the ON/OFF button for
a total of 15 seconds.
3. The Axle will turn on, lighting the
battery indicator on the board.
What's In The Box?

Riding Your Axle

only one foot mat. THIS IS NORMAL.

Charging Your Axle

Plug the charger into
the charge port
(Located In The Back)

Calibration

Quick Start Guide
Correct Fitting:
Make sure your
helmet covers your
Move
Back
4. After the light ashes 5 times, release
the ON/OFF button
5. Turn the board o and then back on.
The calibration will now be complete.
forehead.
Move
Forward
Stop
NOT FULLY
CHARGED
FULLY
CHARGED