Screen Menu - Sony VPL-VW95ES Operating Instructions Manual

Screen Menu

The Screen menu is used to adjust the input signal. You can adjust the size of the picture,
and select wide screen mode, etc.
.
Note
These items may not be available, depending on the type of input signal. For details, see "Input
Signals and Adjustable/Setting Items" (1 pages 85 to 88).
Picture Position
You can store up to five lens settings.
After selecting and confirming the desired position from among
"Position 1" to "Position 5," do "Save," "Delete," or "Select."
"Save": Stores the current lens position in the selected "Position (1-5)."
If a setting is already stored in that Position, it is overwritten.
"Delete": Deletes the stored setting. After the setting is deleted, the
"Position 1" to "Position 5" in the display change to "---."
"Select": The lens position is automatically adjusted to the selected
setting.
Notes
• After you have selected and confirmed the lens position, the lens starts
to move automatically. Do not touch the lens and the area around the
lens, otherwise it may cause injury or a malfunction.
• If you press any button on the projector while the lens is moving, the lens
stops. In this case, select the lens position again or adjust the lens
manually.
• When you use a 2.35:1 aspect ratio picture or a 16:9 picture using the
Picture Position function, make sure that the installation position is
suitable (1 page 33).
• The Picture Position function is not guaranteed to reproduce the lens
settings precisely.
55