Compumatic TR220D Instruction Manual page 17

6 6 6 6 . . . . Trouble Trouble Trouble Trouble Shooting Shooting Shooting Shooting
◎ Press RESET button to re-start the program when it is not properly work.
Trouble Trouble Trouble Trouble
1. Power failure
2. The time card is
The time
damaged
recorder
3. The power cord is
does not
disconnected.
accept time
4. Cards were inserted or
card
pulled out by force.
1. Mistakes in setting the
The clock is
clock.
slow (or fast)
2. Power failure
1. The ribbon cartridge is
not set correctly.
Light printing
2. The cartridge has been
used for long time.
1. Incorrect setting of day
The printing change.
position is 2. Improper use of the
wrong time recorder.
The date is Mistakes in setting the date Set it correctly.
incorrect
Improper use of the time
Imperfect
recorder
printing
All manuals and user guides at all-guides.com
Causes Causes Causes Causes
1.
2. Change a new cartridge.
- 17 -
Corrective Corrective Measures Corrective Corrective Measures Measures Measures
1. Wait until power supply is
restored
2. Change a new time card
3. Insert the power plug firmly into
the power outlet.
4. Pull the power plug out of the
power outlet, then insert again.
Set it correctly.
Set it correctly.
1. Set it correctly.
2. Make sure to insert the card in
the card slot and remove it
properly.
Make sure to insert card in the
middle of card slot and remove then
properly.