Stealth Cam STC-V550MTR User Manual page 26

All manuals and user guides at all-guides.com
Using the camera in PIR detection mode
Mount the camera to tree or other sturdy object using either a
•
tree screw (optional accessory) or supplied mounting strap
(You may refer to the mounting suggestions section in this
manual)
Open the front housing and move the switch to the ON position.
•
At this point you have 30 seconds to make any program
adjustments.
After 30 seconds the camera's green LED light will begin
•
blinking and enter count down mode. This is your indication to
leave the coverage area within one minute.
After one minute the camera will enter either image burst mode
•
or adjustable video mode based on your program setting. The
camera will then time out between 1 ~ 60 minutes, also based
on your setting.
The time between motion detection and the camera taking
the pictures may vary due to lighting conditions, charging
of the flash, program setting and battery power level.
www.stealthcam.net
STC-V550MTR
Toll Free 877-269-8490
26