FujiFilm ID-T741 Operation Manual
FujiFilm ID-T741 Operation Manual

FujiFilm ID-T741 Operation Manual

Fcr id terminal
Hide thumbs Also See for ID-T741:

Advertisement

Quick Links

ID Terminal Operation Manual
FUJI COMPUTED RADIOGRAPHY
FCR ID TERMINAL
ID-T741
OPERATION MANUAL
5th Edition
.A>HK=HO 
MADE IN JAPAN
FUJI PHOTO FILM CO., LTD.
TOKYO 106-8620
009-021-40
Fuji Photo Film Co., Ltd.
2001. 02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ID-T741 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FujiFilm ID-T741

  • Page 1 ID Terminal Operation Manual FUJI COMPUTED RADIOGRAPHY FCR ID TERMINAL ID-T741 OPERATION MANUAL 5th Edition .A>HK=HO  MADE IN JAPAN FUJI PHOTO FILM CO., LTD. TOKYO 106-8620 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 2 ID Terminal Operation Manual 1. No part or all of this manual may be reproduced in any form without prior permission. 2. The information contained in this manual may be subject to change without prior notice. 3. Fuji Photo Film shall not be liable for malfunctions and damages resulting from installation, relocation, remodeling, maintenance, and repair performed by other than dealers specified by Fuji Photo Film.
  • Page 3 ID Terminal Operation Manual FOREWORD Thank you for purchasing the ID Terminal. For users to understand the functions of the ID Terminal and use them to the fullest, this manual “ID TERMINAL OPERATION MANUAL” describes in detail how to operate the unit, precautions in operations, etc.
  • Page 4: Table Of Contents

    ID Terminal Operation Manual CONTENTS INTRODUCTION _____________________________________________ " 1. PRECAUTIONS BEFORE USE _______________________________ # 2. INTRODUCING ID TERMINAL ________________________________ % 1. Outline of the Unit ...................... % 2. Name and Function of Each Part ................& 3. Precaution for Installation .................. 3.
  • Page 5 ID Terminal Operation Manual 5. TROUBLE SHOOTING ______________________________________ #& 1. Method to Deal with Errors ..................#& 2. When These Happen ....................#' 6. MAINTENANCE ___________________________________________ $ 1. Maintenance by Users ....................$ 2. Periodic Inspection ..................... $ 009-021-40 Fuji Photo Film Co., Ltd. 2001.
  • Page 6: Introduction

    ID Terminal Operation Manual INTRODUCTION This operation manual provides detailed information required for using this unit. To make full use of available functions, read the following sections carefully. The manual contains the following sections: 1. PRECAUTIONS BEFORE USE Contains basic precautions to be read before using the unit. 2.
  • Page 7: Precautions Before Use

    ID Terminal Operation Manual PRECAUTIONS BEFORE USE This chapter lists the precautions required to use the ID Terminal safely. Before starting use, read this chapter very carefully and understand its operations thoroughly first. Safety precautions consist of “WARNING”, “CAUTION”, and “NOTE” which is a supplementary explanation.
  • Page 8 ID Terminal Operation Manual 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 9: Introducing Id Terminal

    ID Terminal Operation Manual INTRODUCING THE ID TERMINAL Outline of the Unit The ID terminal is a unit that registers the ID information and various parameters of images in the FCR Image Reader when using IPs (imaging plates) to take radiographs. When radiographs are taken using IPs, the images will be read by the FCR Image Reader.
  • Page 10: Name And Function Of Each Part

    ID Terminal Operation Manual Name and Function of Each Part & 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 11 ID Terminal Operation Manual Starting/ending button Button to start/end the unit. Display Touch-panel type color LCD display to display operation screen. If the unit is not operated for a certain period of time, the screen saver will function, and the screen will be undisplayed.
  • Page 12: Precaution For Installation

    ID Terminal Operation Manual Precautions for Installation This unit is designed for the general office use. The use in an extreme environment may lead to malfunction. Avoid installing the unit in the following places, where considered to be unsuitable for operating the unit.
  • Page 13 ID Terminal Operation Manual 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 14: Operations (Basic)

    ID Terminal Operation Manual OPERATIONS (BASIC) The following explains the various basic operations required for using this unit. Understand each section thoroughly to efficiently perform actual operations. Starting Up/Ending the Unit Step1. Starting Up the Unit Ensure the followings before starting up the unit. •...
  • Page 15 ID Terminal Operation Manual After a while, the following screen will be displayed. The starting up is completed. (Normally, starting up takes a few minutes from the start to completion.) If there is an IP which is not read by FCR Image Reader even though its ID information was registered in the last operation, the number and information of unprocessed IP will be listed as shown below.
  • Page 16: Step2. Ending The Unit

    ID Terminal Operation Manual Step2. Ending the Unit Ensure that the unit is not running, and press starting/ending button. The unit will end. NOTE • Be sure to shut-down the unit with the procedure shown above. Shutting down the unit with the power switch at the back of the unit may result in malfunction.
  • Page 17: Selection Operation

    ID Terminal Operation Manual Selection Operation Select the button on the screen (touch panel). Press the button to select. The button is selected and the corresponding processing will be executed. When selecting a button, lightly touch a button with the tip of a finger. Pressing the button with a finger flat down or pressing the button too hard may result in the malfunction.
  • Page 18: Input Operation

    ID Terminal Operation Manual Input Operation Characters (letters/number/symbols) and numerical values are input using the software keyboard displayed on the screen (touch panel). If the unit is provided with an optional keyboard (hardware keyboard, hereafter) as an option. The hardware keyboard can be used in the same manner as the software keyboard. Refer to the following explanation.
  • Page 19 ID Terminal Operation Manual Symbol button Inputs symbols according to the input mode. Number mode Upper-case letter mode : . , ’ : Lower-case letter mode : . , ’ : AC button Clears all the characters in the text box. - button Inputs - (hyphen).
  • Page 20: Step2. Text Box And Cursor

    ID Terminal Operation Manual Step2. Text Box and Cursor The text box refers to the box to which characters are input. The cursor “ | “ blinking in the box indicates the point of starting input or inserting characters. Text box When inputting/deleting characters, move the cursor to the desired point as shown below.
  • Page 21: Step3. Inputting/Deleting Characters

    ID Terminal Operation Manual Step3. Inputting/Deleting Characters Inputting Move the cursor to the desired point, and input the appropriate character. The character will be input (insert) on the left of the cursor. Exercise care that inputting inappropriate characters are regarded as invalid (e.g., inputting letters in the numerical value input box). NOTE •...
  • Page 22: Operation Screen

    ID Terminal Operation Manual Operation Screen The routine processing mode of this unit has four types of operation screens for basic operations. Patient Information Input (HOME) Screen The screen to input the patient information. It is displayed when the unit is started and is the starting point of the processings.
  • Page 23 ID Terminal Operation Manual The following shows the patterns of columns to display patient’s information. These vary depending on the setting made when the unit is installed. <Standard Display> Patient ID number Patient name Date of birth of patient Sex of patient Examination number Department name 009-021-40...
  • Page 24 ID Terminal Operation Manual Anatomical Region Selection (A.R.) Screen The screen to select the anatomical region of images. It is displayed after the patient information is input. Exposure Menu Selection (MENU) Screen The screen to select the exposure menu of images. It is displayed after the anatomical region is selected.
  • Page 25 ID Terminal Operation Manual IP Number Registration (PRM.) Screen The screen to register the IP number. It is displayed after the exposure menu is selected. Various parameters for image processings can also be made on this screen. – Screen display of when Image Readers of different types are simultaneously used – When Image Readers of cassette type and built-in type are simultaneously used, the buttons shown below are displayed at the bottom of each screen.
  • Page 26: Operation Flow Chart

    ID Terminal Operation Manual Operation Flow Chart The operation flow chart is shown below. For the details of the operation, refer to the pages shown in the parentheses. Starting Up the unit (Page 12) Step5. Patient Information Input (HOME) Screen Retrieving/Deleting the ID information Step1.
  • Page 27 ID Terminal Operation Manual 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 28: Operations (Processing)

    ID Terminal Operation Manual OPERATIONS (PROCESSING) Basic Operation The following explains the basic operations to input ID information of images. Perform the operations from Step1. to Step3. in order. Step1. Inputting the Patient Information Input the patient information. Perform the following operations according to the input method. n n n n n Input Using the ID Card Input the patient information using the ID card (CR card) prepared for each patient in advance.
  • Page 29 ID Terminal Operation Manual n n n n n Input Using the Software Keyboard Input the patient information using the software keyboard (hardware keyboard). The patient information input box and the software keyboard is displayed immediately after the starting up the unit or when moving from a different screen to the Patient Information Input (HOME) Screen.
  • Page 30 ID Terminal Operation Manual –Inputting the department name/examination number– If the department name and the examination number are set, the information of those items can be input on the Anatomical Region Selection (A.R.) Screen and other screens. If these items are, however, set for the display purpose only (buttons are grayed out), information cannot be inputted.
  • Page 31 ID Terminal Operation Manual Examination number : Press The examination number input box and the software keyboard will be displayed. Input the examination number, and press ( Enter key). The examination number will be set, and the box and the software keyboard will be closed. : Cancels the operation.
  • Page 32: Step2. Inputting The Exposure Information

    ID Terminal Operation Manual Step2. Inputting the Exposure Information Input the exposure information. In addition to the procedure explained here, the routine menu selection method can be used to input the exposure conditions. Refer to page !$. First, select the anatomical region. Press an anatomical region button on the Anatomical Region Selection (A.R.) Screen.
  • Page 33 ID Terminal Operation Manual Next, select the exposure menu. Press an exposure menu button on the Exposure Menu Selection (MENU) Screen. : Goes back to the Patient Information Input (HOME) Screen. : Goes back to the Anatomical Region Selection (A.R.) Screen. : Moves to the Routine Menu Selection (ROUTINE) Screen (page !$).
  • Page 34 ID Terminal Operation Manual Step3. Registering the IP Number Register the IP number. Place the sensor of the bar-code reader on the bar-code label of the exposed IP. 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 35 ID Terminal Operation Manual When a blip sounds, the reading is completed and the IP number is registered. The registered IP number will be displayed at the bottom of the screen for the certain period of time. : Goes back to the Patient Information Input (HOME) Screen. : Goes back to the Anatomical Region Selection (A.R.) Screen (the same as pressing the anatomical region icon button).
  • Page 36 ID Terminal Operation Manual –Registering the IP number using the software keyboard– The IP number can be registered using the software keyboard (hardware keyboard). Use this function if the IP number cannot be read with the bar-code reader for some reason. Press The IP number input box and the software keyboard will be displayed.
  • Page 37 ID Terminal Operation Manual 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 38: Applied Operations

    ID Terminal Operation Manual Applied Operations Step1. Inputting the Exposure Information with the Routine Menu Selection Method The routine menu selection method is a method that collectively registers the exposure menus frequently used from which an exposure menu is selected. This method skips the selection of the anatomical region and simplifies the input of the exposure information.
  • Page 39 ID Terminal Operation Manual The Routine Menu Selection (ROUTINE) Screen will be displaced. Press an exposure menu button. : Goes back to the Patient Information Input (HOME) Screen. : Moves to the Anatomical Region Selection (A.R.) Screen. : Moves to the Anatomical Region Selection (A.R.) Screen. : Retrieves/deletes the ID information (page "...
  • Page 40: Step2. Exposing Several Patients With The Same Exposure Information (Changing The Patient Information)

    ID Terminal Operation Manual Step2. Exposing Several Patients with the Same Exposure Information (Changing the Patient Information) For example, as in an X-ray room for exposing the chest, several patients may be exposed using the same exposure information. In this case, from the second patient and onwards, the exposure information need not be input and operations can be performed simply by inputting the patient information and IP number.
  • Page 41 ID Terminal Operation Manual n n n n n Input Using the Software Keyboard At the IP Number Registration (PRM.) Screen after the completion of the operation of the first patient (inputting the exposure information → registering the IP number), press ( F1 key).
  • Page 42 ID Terminal Operation Manual Step3. Taking Several Exposures with the Same Patient Information and Exposure Information When taking several exposures of the same patient with the same exposure information, the operation can be performed simply by registering the IP number, skipping the input of the patient information and the exposure information for the second exposure and onwards.
  • Page 43 ID Terminal Operation Manual Step4. Exposing with the Same Patient Information but with Different Exposure Information When taking several exposures of the same patient with the exposure information changed, the operation can be performed simply by inputting the exposure information and registering the IP number, skipping the input of the patient information for the second exposure and onwards.
  • Page 44: Step5. Retrieving/Deleting The Id Information

    ID Terminal Operation Manual Step5. Retrieving/Deleting the ID information The ID information of the image can be retrieved (confirmed)/deleted using the IP number of the image as the keyword. Delete can be used when the IP is incorrectly registered, etc. Press on any screen.
  • Page 45 ID Terminal Operation Manual The following box will be displayed during retrieval. When the retrieval is completed, the ID information display box will be displayed. Press to close the box as is, or press to delete the ID information. When is pressed, a confirming alert box will be displayed.
  • Page 46: Setting Various Parameters

    ID Terminal Operation Manual Setting Various Parameters Sets the various parameters displayed at the IP Number Registration (PRM.) Screen. These parameters are set with the appropriate condition for each exposure menu in advance. Perform the operation as necessary. Step1. Image Inversion Set the inversion display of image.
  • Page 47 ID Terminal Operation Manual The image inversion setting box will be displayed. Press one of the buttons. The display style of the image will be set, and the box will be closed. : Normal position. : Top/bottom inverse. : Right/left inverse. : Top/bottom/right/left inverse.
  • Page 48: Step2. Film Output Format

    ID Terminal Operation Manual Step2. Film Output Format Sets the film output format of the image. Press the menu button. The film output format setting box will be displayed. Press one of the buttons, and press . The film output format of the image will be set, and the box will be closed.
  • Page 49 ID Terminal Operation Manual 2-in-1/4-in-1 format is the format to output two or four different images of the same patient onto one film. When 2-in-1/4-in-1 format is set, the status is displayed in the menu button as shown below. Group code Registration number Final image specification mark Group code...
  • Page 50: Step3. Edr Mode

    ID Terminal Operation Manual Step3. EDR mode Sets the EDR mode of the image (image reading sensitivity setting method). Press the menu button. The EDR mode setting box will be displayed. Press one of the buttons. : AUTO mode. : SEMI-AUTO mode. : FIX mode.
  • Page 51 ID Terminal Operation Manual FIX mode : When is pressed, the S-value input box and the software keyboard will be displayed. Input the S-value (the value of reading sensitivity: 2 to 20000), and press ( Enter key). The S-value will be set, and the box and the software keyboard will be closed. : Cancels the operation.
  • Page 52: Step4. Ip Reading Size

    ID Terminal Operation Manual Step4. IP Reading Size Sets the Reading Size of the IP. Press the menu button. The IP reading size setting box will be displayed. Press either button. The IP reading size is set, and the box will be closed. : Physical size.
  • Page 53: Step5. C-Shift/S-Shift

    ID Terminal Operation Manual Step5. C-Shift/S-Shift Sets the C-Shift (contrast) and the S-Shift (density) of the image. Press the menu button. The C-Shift/S-Shift setting box will be displayed. Press and set the value, and press ( F5 key). The C-Shift/S-Shift is set, and the box will be closed.
  • Page 54: Step6. Filing Mode

    ID Terminal Operation Manual Step6. Filing Mode Sets the filing mode to file images to ODF (Optical Disc Image Filing Unit). Press the menu button. The filing mode setting box will be displayed. Press either button. The filing mode of images is set, and the box will be closed. : Does not record images to ODF.
  • Page 55 ID Terminal Operation Manual Step7. Number of Films Output Sets the number of film output of images. Press the menu button. The number of film output setting box will be displayed. Press and set the number of film output, and press ( F5 key).
  • Page 56: Step8. Function

    ID Terminal Operation Manual Step8. Function Sets the function (special processing implemented according to the exposure method of the image). Press the menu button. The function setting box will be displayed. Press one of the buttons. The function is set, and the box will be closed. : Routine processing (normal exposure).
  • Page 57 ID Terminal Operation Manual Step9. Film Mark Sets the film mark (the character to indicate the exposure direction shown on the film). Press the menu button. The film mark setting box will be displayed. Press the film mark button. The film mark is set, and the box will be closed. : Clears the current setting and goes back to the Anatomical Region Selection (A.R.) Screen.
  • Page 58: Step10.Distribution Code

    ID Terminal Operation Manual Step10. Distribution Code Sets the distribution code (the code number to specify the destination of the transfer) of images. Press the menu button. The distribution code input box and the software key board will be displayed. Input the distribution code, and press ( Enter key).
  • Page 59: Step11.Pixel Density

    ID Terminal Operation Manual Step11. Pixel Density Sets the pixel density of the image. Press the menu button. The pixel density setting box will be displayed. Press either button. The pixel density of the image is set, and the box will be closed. : Standard density.
  • Page 60 ID Terminal Operation Manual TROUBLE SHOOTING Method to Deal with Errors If an error occurs while the unit is running, the following alert box that shows an error message and an error code will be displayed. In this case, press in the alert box and end the unit once, and then restart the unit.
  • Page 61 ID Terminal Operation Manual When These Happen... n n n n n The unit will not start... If the unit will not start by pressing the starting/ending button, check and try the followings. → Is the power cable connected? Properly connect the power cable to an AC outlet. →...
  • Page 62 ID Terminal Operation Manual MAINTENANCE Maintenance by Users n n n n n Cleaning the Display If the surface of the display gets smudged or dusty, end the unit and wipe it with soft clothe. If the smudge is severe, use soft clothe soaked in water and squeezed tightly to wipe it out. Exercise care to wipe the surface of the display because it is easily scratched.
  • Page 63 ID Terminal Operation Manual Periodic Inspection After the guarantee period, periodic inspection by maintenance contract is recommended for maintaining the performance of the unit. 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...
  • Page 64 ID Terminal Operation Manual END-USER LICENSE AGREEMENT FOR MICROSOFT SOFTWARE IMPORTANT-READ CAREFULLY : This End-User License Agreement (“EULA”) is a legal agreement between you (either an individual or a single entity) and the manufacturer (“Manufacturer”) of the special purpose computing device (“SYSTEM”) you acquired which includes certain Microsoft software product(s) installed on the SYSTEM (“SOFTWARE PRODUCT”...
  • Page 65 ID Terminal Operation Manual 5. LIMITED WARRANTY. • Limited Warranty. Manufacturer warrants that the SOFTWARE will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt. Any implied warranties on the SOFTWARE are limited to ninety (90) days. Some states/jurisdictions do not allow limitations on duration of an implied warranty, so the above limitation may not apply to you.
  • Page 68 ID Terminal Operation Manual European Authorized Representative : FUJIFILM MEDICAL SYSTEMS U.S.A., INC. FUJI PHOTO FILM (Europe) GmbH 419 WEST AVENUE, STAMFORD CT 06902, U.S.A. Heesenstrasse 31, D-40549 Düsseldorf Germany 009-021-40 Fuji Photo Film Co., Ltd. 2001. 02...

Table of Contents