Advertisement
Mercedes Sprinter Integrated
W907 /W910, Cab system
1.3. mounting of the mid-high modules in the dashboard
(only suitable for vehicles with storage compartment without cover ap)
•
When the cables have been properly routed through the hole (no excessive tension) insert both screws of the cupholder storage
compartment and tighten them (see g. F/G)
•
Clip the tweeter cover strips back in place and tighten the screw on the outside (see Fig. H).
•
Mount original HT cover (see Fig. I)
•
Place the mid-high module on the discard tray and connect the tweeter and mid-range drivers
so that they are short-circuit-proof (see Fig. J).
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I sounddesign@jehnert.de I www.jehnert.de
Assembly instruction
Status: 12.05.2022
Art.- No. 65130
F
H
J
I
G
Advertisement
