Jehnert 65130 Assembly Instruction Manual page 4

Mercedes Sprinter Integrated
W907 /W910, Cab system
1.2 Assembly of the crossovers
A
• Wrap mid-high crossover in damping eece (see Fig. A).
• Place crossover in indentation of storage compartment and route tweeter connection through original tweeter hole and
connect with cable (see Fig. C and D).
• Drill a 10 mm hole in the center of the cupholder/storage compartment ->ideally use a step drill.
• Feed the midrange and tweeter speaker cables from below through the drilled hole and check
the position of the storage compartment. (see g. E)
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I sounddesign@jehnert.de I www.jehnert.de
Assembly instruction
Status: 12.05.2022
Art.- No. 65130
D
E
B
C