Vauxhall Astra 2021 Owner's Manual page 109

Climate control settings menu
Press ; to open the climate settings
on the Info Display.
Info Display 3 78.
Automatic mode AUTO
Basic setting for maximum comfort:
● Preselect temperature.
● Press AUTO, the air distribution
and fan speed are regulated
automatically.
Three different pre-set fan
speeds can be selected by
repeatedly tapping on AUTO
either on the climate control
panel or on the Info Display: soft,
normal or fast. The selected
setting is shown on the Info
Display.
● Open all air vents to allow
optimised air distribution in
automatic mode.
● Air conditioning must be
activated for optimal cooling and
demisting. Press A/C to switch on
air conditioning. Activation is
indicated in the status bar on the
Info Display or by the LED in the
button.
Temperature preselection
Set the preselected temperature on
the Info Display or by using A on the
climate control panel. The
preselected temperature is indicated
in the status bar on the Info Display.
Dual zone climate control: Set the
preselected temperatures separately
for driver and front passenger to the
desired value on the Info Display or
by using the left and right buttons on
the climate control panel. The button
on the passenger side changes the
temperature for the passenger side.
Climate control
The button on the driver's side
changes the temperature for the
driver's side or for both sides
depending on activation of
synchronisation SYNC.
Recommended temperature is 22 °C.
If the minimum temperature is set, the
climate control system runs at
maximum cooling.
If the maximum temperature is set,
the climate control system runs at
maximum heating.
Notice
If A/C is switched on, reducing the
set cabin temperature can cause the
engine to restart from an Autostop or
inhibit an Autostop.
Stop-start system 3 119.
Dual zone temperature
synchronisation SYNC
Touch SYNC in the climate control
settings on the Info Display to
activate / deactivate synchronisation
of the passenger side temperature
setting to the driver side temperature
setting. Activation of synchronisation
is indicated in the status bar on the
Info Display.
107