Haier QPCA09 Owner’s Manual And Installation Instruction page 13

INSTALLATION INSTRUCTIONS
CONNECT EXHAUST HOSE TO THE
4.
WINDOW PANEL
Place t he Air Condit ioner close to t he window ensuring
t here is at least 20" of clearance from t he wall and
any ot her obst ruct ions. Extend t he hose so t hat it
reaches t he Window Kit . Insert t he Exhaust Hose
Adapter into t he opening in t he Window Kit and slide
it into t he locking posit ion. Ensure t hat t he hose runs
st raight to t he window wit h no excess extension.
Import ant : The Air Condit ioner must be vented to t he
out side. Do not use a longer hose or extend t he hose
included wit h t he Air Condit ioner or t he unit will not
cool properly and will overheat .
49- 5000468 Rev. 1
COMPLETE INSTALLATION
5.
WARNING
Elect rical Shock Hazard
Plug into a grounded 3 prong out let .
Do not remove t he ground prong from t he power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in deat h, fire or
elect rical shock.
A. Plug t he power cord int o a grounded 3 prong
out let .
B. Press t he Reset but t on on t he plug t o ensure
t he safet y plug is providing power t o t he Air
Condit ioner.
C. Allow 20" of clearance around t he Air
Condit ioner for proper air circulat ion
D. When removing t he Air Condit ioner, be sure t o
remove t he Window Kit .
13