Info-Time - Atag BrainQ RSC/2 User Manual

8A520900_GB.qxp 12.11.2004
Room temperature
R R O O O O M M T T E E M M P P H H C C
Unmixed heating circuit
2 2 1 1 . . 0 0 °C
(room sensor activated)
or
Room temperature
R R O O O O M M T T E E M M P P H H C C
Unmixed heating circuit
- - - -
(room sensor deactivated)
* Outside temperature is only displayed when the outside sensor is connected.

Info-time

The standard display will appear after a set time if no key is pressed. It is possi-
ble to have the information shown permanently with a fastkey procedure or to
adjust the display time (except for the general exit time SYSTEM - Parameter 11):
- press the i-key for 3 seconds
- INFO TIME (= duration of the information in the display) will appear
- Turn the rotary pushbutton to the desired value.
- Press the rotary pushbutton.
- The selected value is activated.
Setting range: OFF (permanent display of selected information)
0.5 to 10 minutes
13:17 Seite 11
Domestic hot water tank
temperature
only with domestic hot water
tanksensor
switching condition tank con-
trol only with tank thermostat
GB
indicates of heating circuit pump and boiler pump
D D H H W W
– boiler status (Off, On)
5 5 2 2 . . 0 0 °C
or
indicates with room sensor activated
T T H H E E R R M M O O S S T T A A T T
– room thermostat function (heating Off, On)
O O F F F F
– current room temperature
D D H H W W
indicates in dependence on type of sensor in hot
water tank
– Domestic hot water tank temperature (with tank
sensor)
– switching condition (with tank thermostat)
Application: Permanent display of selected information (monitoring)
Page GB-11