dellonda DG16 Manual

dellonda DG16 Manual

3 burner gas bbq, piezo ignition, thermometer, shelves, castor wheels

Advertisement

Quick Links

Dellonda 3 Burner Gas BBQ, Piezo Ignition,
Thermometer, Shelves, Castor Wheels
Model No. DG16
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
DG16 Issue:3 14/09/20
www.dellonda.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DG16 and is the answer not in the manual?

Questions and answers

Summary of Contents for dellonda DG16

  • Page 1 Thermometer, Shelves, Castor Wheels Model No. DG16 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. DG16 Issue:3 14/09/20...
  • Page 2: Specification

    GAS LEAK CHECK Put soapy water on all the connections where the gas reaches. Open the gas cylinder valve and regulator. If bubbles are seen, tighten the connection. If bubbles are still seen, close all valves, turn off the regulator and contact your Dellonda for help. Never use the barbecue with a leak.
  • Page 3 • NEVER store a spare gas bottle or an empty/disconnected bottle near or under the barbecue or near any other ignition or heat source. • Adequate ventilation is vital for combustion and efficiency of performance of the barbecue. This will ensure the safety of the user and other people in the vicinity of the area where the appliance is being used.
  • Page 10: Operation

    Check the hose before each and every use, looking for cracks, cuts or any abrasions. • If the hose is found to be faulty in any way, DO NOT attempt to use your barbecue, replace the hose with one from Dellonda. •...
  • Page 11: Maintenance

    • 2. Make sure all gas controls on the barbecue are in the OFF position. (See fig.2). • 3. Connect regulator to the gas bottle. Turn the gas cylinder valve to the ON position at the regulator. • 4. Push down the control knob (fig.1A) and keep pressing while turning anticlockwise to the high position. This will cause the piezo electric system to spark.
  • Page 12 Drain any fluids (if applicable) into approved containers, in accordance with local waste regulations. Under the Waste Batteries and Accumulators Regulations 2009, Dellonda would like to inform the user that this product contains one or more batteries. It is our policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice.

Table of Contents