Page 1
instruction manual revision GENERAL This appendix contains changes that have been made since the pri n t i n g o f y o u r O w n e r ’ s G u i d e n u m b e r 68P02952C60-A .
Page 2
MICOM-2 E S A L E F r o n t Mo u n t Mo d e l C o m p l e m e n t s & A c c e s s o r i e s ………………………………….
Page 3
09MB000011 Interface connector from 25 to 44 (Note 1) Note 1: The MICOM-2ES ALE, MICOM-2ETS ALE, MICOM-2RS ALE accessory connector is 44 pin. For connecting MICOM-2E ALE, MICOM-2ET ALE, MICOM-2R ALE accessory devices is required to connect first the fixed adapter 09MB000011. The fixed adapter is pin to pin compatible.
DATE: 10.12.01 PAGE 3 OF 4 PAGES Table: New Pin (from 26 to 44) Assignments of Accessory Connector J5 Pin Name Function Ground Output Ground Output ALE_CHANNEL_CHANGE Interrupt Change channel. Input TXD_ Point to Point protocol to HOST. Input Option SPARE_1 I/O Option Not connected...
Page 5
Multiple net operations: The radio is capable of operation in multiple nets simultaneously. A net is defined as a group of stations that scan the same frequencies. The MICOM can support, at least 20 nets. Each net includes the following elements: A group of receiveing and associated transmiting frequencies.
Page 6
DATE: 10.12.01 6. Calling in Multi-Net: Press CALL, select the NET # , Press ENTER, select the address and press SEND. 7. Calling from single NET radio to a Multi-Net radio: In those cases the on single NET radio you should defined the ALE signaling length according to the channels associate in the Multi-Net radio.
Need help?
Do you have a question about the 2ES ALE and is the answer not in the manual?
Questions and answers