Related Manuals for aquilar AquiTron AT-WFM
Summary of Contents for aquilar AquiTron AT-WFM
- Page 1 AquiTron AT-WFM Water Flow Monitor I N S TA L L AT I O N & OPE R AT I O N I N ST R U CT I O N S...
-
Page 2: Table Of Contents
Protection Level Mode Volume Per Timed Crosscheck Protection Level Time Meters Pulse Rate Valves Change Installer Info Factory Reset Event Log Messages Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 3: General Information
A. GENERAL INFORMATION The AquiTron AT-WFM water monitoring system that has been specifically designed to help achieve the requirements of BREEAM 2018 (BRE Environmental Assessment Method). The AT- WFM system will allow designers, M&E contractors and developers to achieve the one of the two WAT 03 Credits available to reduce the impact of water leaks that may otherwise go undetected. -
Page 4: Fitting The Module
Note: Do not allow the front panel to hang from the ribbon cable. Take care not to trap or damage the ribbon cable when installing the front panel. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 5: Wiring
Solenoid Valve should be operated at least once a month to ensure proper cleaning and closing. We strongly recommend a strainer is fitted prior to any meters or valves to prevent debris fouling the mechanism. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 6: Connection
Plugging a battery in during the boot up process can cause damage to the controller. Figure 4 - Battery Connector Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 7: Volt Free Relay Connections
Figure 7 - Pulse White +ve White +ve Brown -ve Input connections Brown -ve Meter 1 (External) Meter 2 (Internal) Pulse Connection Pulse Connection Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... - Page 8 3 - Live (Close Valve) E - Earth Live Earth Neutral L1 - Close Valve Figure 8 - AT-RU1 Connections L2 - Open Valve Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk...
-
Page 9: Pulse Output Connection
The status LED on the front of the AT-WFM should be green to indicate it is monitoring and no alarms are present. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 10: Menu Screen
K2. INSTALLER INFO Home>>Menu>>Installer Info This screen displays the installer contact information. By default it has Aquilar contact details loaded. These details can be changed to show the details of the installation / commissioning / current maintenance company. -
Page 11: Manual Override
(see section L1.) Figure 15 - Event History Screen Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 12: Setup (For Authorised Users Only)
Figure 16 - Setup - Password Screen From this page you can access the screens necessary to setup the AT-WFM controller. Figure 17 - Main Setup Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 13: Date And Time
Note: The AT-WFM system has a real time clock that will retain the correct time and date in the event of power loss. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 14: Protection Level Mode
Automatic Reset – The controller will automatically reset as soon as the water flow stops Note: A flow switch can be used in place of pulse water meters on this setting if required. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... - Page 15 Important Note: Selecting 0% tolerance requires the pulse inputs to be matched at all times. Important Note: For effective operation identical pulse Meters with high accuracy must be used. Contact Aquilar for details on our range of suitable water meters.
-
Page 16: Protection Level Time
AT-WFM. Figure 23 - Meters Pulse Screen Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... -
Page 17: Meters
If not the system will not be able to accurately measure water volume. Please contact Aquilar if you require a suitable pulse meter. Note: If this screen is blank it is because no meters have been enabled. -
Page 18: Valves
L7. CHANGE INSTALLER INFO Menu>>Setup>>Password>>Change Installer Info On this screen the installer information can be changed. By default Aquilar details are shown. To make changes to the information shown simply press the ‘Change’ button next to the information you wish to adjust. This will bring up the on-screen keyboard. -
Page 19: Event Log Messages
Message to record the time when a new leak is discovered. This message will be logged every time the system goes into alarm AR ALARM RESET Alarm Reset Message to record that the system has been reset. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk... - Page 20 The only obligations of Aquilar Limited are those in the Aquilar Standard Terms and Conditions of Sale for this product, and in no case will Aquilar Limited be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use or misuse of the product.
Need help?
Do you have a question about the AquiTron AT-WFM and is the answer not in the manual?
Questions and answers