Download Print this page

aquilar AquiWave AQW-SK Installation & Operation Instructions

Survey kit

Download this manual

I N STA L L AT I O N

& O PE R ATI ON

INSTRUCTIONS

AquiWave

AQW-SK

Survey Kit

Need help?

Do you have a question about the AquiWave AQW-SK and is the answer not in the manual?

Page 1 AquiWave AQW-SK Survey Kit I N STA L L AT I O N & O PE R ATI ON INSTRUCTIONS...
Page 2 It is important the AQW-SK-TX radio transmitter be positioned in the exact position the control panel is to be mounted with the antenna in a vertical orientation. Failure to do this may invalidate the survey. Unit 30, Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, West Sussex, RH12 3JR +44 (0) 1403 216100 info@aquilar.co.uk www.aquilar.co.uk...
Page 3 RBP booster panel or AQW-IA wired antenna must be used to extend the signal range to the area in question. For increased reliability Aquilar recommend using AQW-RBP or AQW-IA devices to extend signal where only adequate signal is present. Unit 30, Lawson Hunt Industrial Park,...
Page 4: Troubleshooting
If the LED on either devices starts flashing during a survey it is OK to continue. However batteries should be replaced before the next survey. Aquilar recommends the batteries are replaced every 100 hours or 12 months of use, whichever occurs sooner.
Page 5 The only obligations of Aquilar Limited are those in the Aquilar Standard Terms and Conditions of Sale for this product, and in no case will Aquilar Limited be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use or misuse of the product.