!
WARNING: DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. THIS WILL COMPLETELY VOID THE PRODUCT WARRANTY.
No power to the shredder or does not shred paper
Check power outlet
1) Make sure power cord is plugged
into a functioning 120V standard
household power outlet.
Or, try using a different working
outlet.
Cool down time
2) Overheating with extended use: In
the event that the shredder has
shred continuously beyond the
maximum running time and over-
heated, the unit will automatically
shut off. If this happens, switch
30
the shredder Off for 30 minutes
Min
or longer before resuming normal
operation.
Check control button
is in Auto mode
3) • Check if the control button is in
• Check if the head unit portion of
Shredder runs continuously
Unplug power
!
Warning:
DO NOT USE CANNED AIR.
1) Unplug the machine from the wall
socket.
Clean sensor
Cotton swab
2) • Find the activation sensor in the
center of the feed slot.
• Use a cotton swab to gently wipe
away any dust or debris that has
collected on the sensor.
TROUBLESHOOTING GUIDE
Auto position.
the shredder is correctly seated
onto the included wastebasket.
Shredder is Jammed or runs in "reverse" mode only
Reverse to remove paper
Pull up
Turn off shredder
Apply shredder oil and
wait for 30 min
30
Min
Set switch to Auto.
Use thick paper to push
jam through
Reduce sheets to
resume shredding
Shredder does not feed or shred credit card or small piece of paper
Feed in the center
8-Sheet Cross-cut Paper and
Credit Card Shredder
B00YFTHJ9C
!
Warning:
RISK OF FIRE. Never use any
petroleum based or flammable
oils or lubricants in or around
the machine as some oils can
combust causing serious injury.
1) • Set the control switch to reverse.
• Pull the paper to remove jammed
paper (as much as possible).
2) • Turn off shredder.
• Apply shredder oil to the feed
slot.
• Let oil soak in to paper and
machine for 30 minutes.
Note: 1. Repeat 1 & 2 steps if
needed
2. Shredder oil not
included.
3) • Set the power switch to turn on
shredder.
• Use thick paper stock or a
greeting card to push the jam
through.
4) • Reduce the number of sheets
being fed (count pages to be
sure not to exceed the maximum
sheet count).
• Refeed the paper.
• Position credit card or small piece of
paper over the credit card section of
the Feeder (center position).
• Try again.
EN
Need help?
Do you have a question about the B00YFTHJ9C and is the answer not in the manual?
Questions and answers