Advertisement
Before first use
•
Remove all packing pieces, labels and stickers
•
Clean the Pizza Maker -
Inside:
1. Use a small amount of hot, lightly
soapy water and a non-scratch nylon
pan scourer, brush or dish cloth to
clean both Top
Non-Stick Heating Plates on the
inside of the Pizza Maker.
2. Repeat with clean water to rinse.
3. Dry thoroughly.
DO NOT IMMERSE THE PIZZA MAKER IN WATER OR ANY OTHER LIQUID.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE.
Cooking instructions
THE PIZZA MAKER CAN GET VERY HOT DURING USE. PLEASE USE WITH
CAUTION AND ALWAYS USE A HEAT PROOF POT HOLDER/OVEN MITT.
The Judge Pizza Maker lets you bake any kind of pizza: frozen, chilled pre-baked
or freshly home-made. The basic method is the same for all pizza types:
1. Insert the Plug
Rating Information) and switch on at the socket. The Amber Power Light will
illuminate
.
2. Preheat the Pizza Maker with the Lid
to Cook' Light
3. When you are ready to cook, raise the Lid
mitt.
4. Carefully place your pizza onto the Bottom Non-Stick Heating Plate
wooden or nylon spatula to adjust the pizza position if necessary.
5. Close the Lid
6. Check the baking progress often (every few minutes) to avoid burning.
7. When the pizza is cooked to your liking, raise the Lid
holder/oven mitt and carefully remove to a board using a wooden or nylon
spatula.
8. Do not cut the pizza while it is on the Bottom Non-Stick Heating Plate
and Bottom
into a mains socket (check your supply is compatible with the
illuminates (about 10-15 minutes).
using a heat proof pot holder/oven mitt.
Outside:
1. The Outer Casing
Maker may be cleaned with a cloth
slightly dampened in a solution of
washing up liquid in hot water. Take
care not to get the outside of the
appliance too wet.
2. Dry thoroughly.
down before use until the Green 'Ready
using a heat proof pot holder/oven
Non-Stick Pizza Maker
of the Pizza
. Use a
using a heat proof pot
.
Advertisement
