Table of Contents
Advertisement
③ Power on the filler machine.
Operation
1. Test out the setting you should set.
Recommended measuring tool: measuring cup or scale.
(Only for reference, different motors on different GFK-160A liquid filling machines have
Speed(S.P)
Volume(per second)
unit: ml
Speed(S.P)
Volume(per second)
unit: FL. OZ.
I. Make sure the filler machine is under "Pause Status", or parameters cannot be
edited.
II. Set parameters "S.P"(filling speed, 0-9 adjustable) and "W.T"(filling time, 0-99.99s
adjustable). Prepare a measuring cup or scale to measure out/weigh out the volume.
It recommended to test several times to achieve a stable and reliable data.
* If tube is bent, or if there is air in the tube, the measurement results will vary. So
collecting several groups of data is necessary.
2. Set parameters.
I. Press "
" and "
parameters.
II.
Press
to save the setting.
Speed and Volume
different rotating speed)
Test liquid: water
1
2
3
4
6
7
16
26
1
2
3
4
1/5
1/4
1/2
7/8
" to move the cursor, and press "
6
5
6
7
8
35
40
46
54
5
6
7
8
1.2
1.4
1.5
1.8
" and "
" to edit the
9
60
9
2
Advertisement
Table of Contents
